Why are the buttons on my Princess Multi Capsule Coffee Machine flashing?
On the Princess 249450.01.001 Multi Capsule Coffee Machine, flashing buttons typically indicate the machine's current operational status or a specific mode: Heating Up: After…
Manuals+ Q&A
Coffee Machine questions & answers
Browse answered questions about Coffee Machine, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How do I reinstall part number 15 (the Brewer) if it has fallen out?
Part number 15 is the Brewer (infuseur). To reinstall it, follow these steps based on the manual's cleaning and maintenance section: Open the Service…
Why is the drip tray symbol flashing on my Jura E4 and how can I fix it if cleaning and reinserting doesn't work?
According to the Jura E4 manual, there is a distinction between the drip tray symbol (ü) lighting up versus flashing: If the symbol lights…
Why is the drip tray symbol flashing on my Jura E4 even after cleaning and reinserting it?
According to the Jura E4 manual, a flashing drip tray symbol indicates that the coffee grounds container or the drip tray is not inserted…
Why is the red light flashing and not turning green on my DeLonghi Dolce Gusto Piccolo XS?
On the DeLonghi Dolce Gusto Piccolo XS, the light indicator behavior typically signals the following states: Flashing Red: This usually occurs while the machine…
Why does water leak out of the filter when using finely ground coffee?
According to the PRIXTON TOSCANA manual, using coffee that is ground too finely can cause issues with water flow. If the coffee is ground…
Why does the descaling indicator light stay on after descaling my Siemens TC 863 coffee machine?
If the descaling indicator light (calc button) remains on after you have performed a descaling cycle on your Siemens TC 863, it usually indicates…
Why is the 'ready' light not turning on even though the coffee machine is heating up and refilling?
Based on the VEVOR FRP286-BV Coffee Machine manual, the "Ready" indicator light is designed to turn on only when the water has reached a…
What should I do when the rinse light appears on the KRUPS SA403 coffee machine?
When the rinse indicator appears on your KRUPS SA403 Crush Experience Coffee Machine, you should perform a rinsing cycle to ensure the internal circuits…
Why is the middle button blinking red and the machine locked?
According to the troubleshooting section of the manual, a flashing red light typically indicates one of two situations: The water tank is empty: Fill…
Why does my coffee machine stop brewing before the water tank is empty, and how can I fix it?
Based on the manual for the Generic MD-295BT (also known under the Barista brand), if your coffee machine is not fully emptying the water…
Why does the LED remain solid orange after descaling?
On NESCAFÉ Dolce Gusto machines like the Mini Me, a solid orange (or amber) LED typically indicates that the machine's descaling alert has been…
Why is the milk frothing light not illuminating even after cleaning and checking for blockages in the milk tank?
If the milk frothing light (Milk button) is not illuminating on your Nespresso Lattissima One (EN510.W), it usually indicates that the machine does not…
Why does my Nespresso Zenius 9737 water tank leak only when it is placed on the machine?
If your Nespresso Zenius 9737 water tank only leaks when placed on the machine, it usually indicates an issue with the connection seal or…
How do I use the KRUPS SA403 coffee machine?
To use your KRUPS SA403 Crush Experience Coffee Machine, follow these primary steps from the Quick Start Guide: Initial Setup: Rinse the machine before…
Why is water not passing through my DENOKIN KF-JN-02 Pro2.0 portable espresso machine?
If water is not passing through your DENOKIN KF-JN-02 Pro2.0, please check the following troubleshooting steps based on the manual: Check Capsule Installation: If…
Why does my coffee flow stop at 12 seconds even though I have set the 1-cup time to 30 seconds and the 2-cup time to 50 seconds?
If your HiBREW H10A UM is stopping at 12 seconds regardless of your time settings, it is likely triggering a safety protection mode or…
Why is the coffee bean indicator flashing and other buttons turning off on my Cecotec 01637 coffee machine?
According to the instruction manual for the Cecotec CCTC-01637 Compact Megautomatic Coffee Machine, when the coffee bean icon flashes and other buttons are inactive,…
Why does the letter 'E' appear on the display of my ESPRESSNA KF-JN-02 while it is charging?
The official manual for the ESPRESSNA KF-JN-02 does not explicitly list a letter "E" in its standard LED indicator guide. However, in many portable…
Why is coffee leaking from the top of the nozzles or flowing very slowly on my Jura D6?
Based on the Jura D6 manual, coffee flowing slowly or leaking from the top of the spout assembly usually indicates a blockage or the…
The milk is not frothing into foam. The milk is cold, and everything is clean. It has never frothed since the day of purchase. Can this be changed in the settings?
The Smeg BCC13 Bean Cup Coffee Machine is equipped with a milk system (13) and a milk supply nozzle (14) for frothing milk. If…
How do I resolve a false 'coffee grounds container full' error on the SilverCrest SKVA 1450 A1?
If your SilverCrest SKVA 1450 A1 is displaying the coffee grounds container full symbol (31) even when the container is empty, please try the…
How do I repack the Smeg ECF02PKUS Espresso Coffee Machine into its original box?
To repack your Smeg ECF02PKUS Espresso Coffee Machine for storage or transport, follow these steps to ensure it fits correctly and safely: Empty and…
What is the correct dose or procedure for descaling the Princess 249450.01.001 coffee machine?
To descale your Princess 249450.01.001 Multi Capsule Coffee Machine, follow these steps every month to prevent damage and maintain coffee taste: Preparation: Purchase a…