Why does my clock change the time back by one hour every few days?
This issue is likely not a defect but a result of the clock syncing with the U.S. Atomic Clock while set to the wrong…
Manuals+ Q&A
Clock questions & answers
Browse answered questions about Clock, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsHow do I set the time on the Equity by La Crosse 30228 LED Alarm Clock using the Hour, Min, and Time Set buttons?
To set the time on your Equity by La Crosse 30228 LED Alarm Clock using the buttons you described, please follow these steps: Press…
How do I reset the time on the Ratakee RA01SA alarm clock?
To set or reset the time on your Ratakee RA01SA, please follow these steps: Ensure the radio is turned OFF before attempting to set…
How do I switch between 12-hour and 24-hour clock modes on the anko 43233830?
To set or toggle between the 12-hour and 24-hour clock formats on your anko 43233830 Alarm Clock, follow these steps: Locate the "M" button…
How can I fix the temperature reading on my Soobest SO800E clock if it is incorrect?
The Soobest SO800E digital wall clock features an internal temperature sensor that refreshes every 30 seconds. If the temperature seems incorrect, please consider the…
How do I disable the alarm on the USCCE Small LED Digital Alarm Clock?
To disable the alarm so it does not sound the following day, follow these steps based on the device's controls: Permanent Disable: Locate the…
How do I cancel or permanently disable the alarm on my Nelsonic Digital AM/FM Clock Radio?
To completely cancel or deactivate the alarm so it does not go off the following day, follow these steps: Locate the ALARM 1/2 button…
How do I change the clock format from 24-hour to 12-hour on the Capello CR22?
Based on the provided manual for the Capello CR22, there is no specific mention of a dedicated toggle button for 12/24-hour formats. However, on…
Why does my NiZONi dual alarm clock display keep going blank instead of showing the time continuously?
Based on the NiZONi Wireless Charging Dual Alarm Clock manual, the display going blank is a built-in power-saving feature. When the clock is not…
The alarm clock makes a clicking sound every few seconds. How can I fix this?
Based on the troubleshooting section of the FILIUS Radio Controlled Alarm Clock manual, a repetitive clicking or continuous movement of the hands often indicates…
How can I disable the snooze function on the Coolfire 1685N without turning off the alarm entirely?
Based on the available documentation for the Coolfire 1685N Vibrating Alarm Clock, there is no specific setting to permanently disable the snooze function while…
How do I troubleshoot the outdoor temperature sensor not reading, and where can I find replacement parts?
If your outdoor temperature has stopped reading, please try the following troubleshooting steps to re-establish the connection: Check Batteries: Replace the batteries in both…
Can you rotate or flip the time projection?
Yes, you can rotate the orientation of the projected image. To do this, press and hold the Time Projection button (indicated as button 9…
Can you set two different alarm times on this clock?
Based on the provided manual for the BUFFBEE RS11, it appears that this model supports only one alarm time. The instructions describe a single…
Why does the display on my Criacr SZ-810 alarm clock turn off and only reappear when tapped?
The behavior you are describing is the Power Saving Function, which is active when the clock is powered by batteries (AAA 1.5V x 3pcs).…
How do I set the time on the Sharper Image Sound Soother, and what should I do if the unit is not responding?
Based on the provided manual, specific step-by-step instructions for setting the initial clock time are not explicitly detailed, though the unit features a digital…
How do I change the time on the Criacr SZ-810 Digital Alarm Clock?
To set the time on your Criacr SZ-810 Digital Alarm Clock, follow these steps: In the normal time display mode, long press the Gear…
Where is the volume control on the La Crosse W72869 and how does the alarm volume function?
The La Crosse Technology W72869 Digital Alarm Clock does not have a manual volume control knob or setting. The alarm volume is designed to…
How do I change the time format from military (24-hour) time to standard (12-hour) time on the Supersonic SC-6025QI?
To switch between 12-hour (standard) and 24-hour (military) time formats on your Supersonic SC-6025QI, follow these steps: While in the normal time display mode…
How do I keep the display on all the time?
To keep the display on all the time, you must power the device using the AC adapter. According to the manual: When powered by…
How do I change the JALL PH01 clock from 24-hour (military) time to 12-hour (standard) time?
To change your JALL PH01 clock from military (24H) to standard (12H) time, you can use either the remote control or the buttons on…
How can I reset the ThreeDucksDirect PH03-RC digital alarm clock if it is frozen?
The user manual for the ThreeDucksDirect PH03-RC does not specify a dedicated reset button. If your clock is frozen or "hung," please try the…
Can the number of meows be adjusted on the Karlsson Modern Kitty KA6100BR clock, or is it defective if it meows 7 times every hour?
Based on the standard operating procedures for Karlsson sound clocks, the number of sounds (meows) should correspond to the current hour (e.g., 1 meow…
How can I increase the brightness of the alarm clock at night?
The ABOVE CLOCK 1902 Digital Alarm Clock has an Ambient Light Sensor Function. To adjust the brightness: Turn the SENSOR button ON. The display…