Why are my Tapo camera push notifications not working, and why won't the app save my notification settings?
It sounds like you are experiencing a synchronization issue between the Tapo app and the cloud server, or a potential software bug. Here are…
Browse answered questions about Camera, including setup, troubleshooting, compatibility and maintenance.
It sounds like you are experiencing a synchronization issue between the Tapo app and the cloud server, or a potential software bug. Here are…
It is common for generic camera manuals to vary slightly from the actual app interface due to frequent firmware and app updates. Since your…
To manage or delete recordings on your Tapo camera, follow these steps within the Tapo app: Open the Tapo app and select your camera…
The YCC365 Plus app is a generic platform used by many different manufacturers rather than being restricted to a single brand. According to the…
If your YCC365 Plus camera is not reading your 128GB micro SD card, please follow these troubleshooting steps based on the manual: Check Signal…
There are a few reasons why PTZ and Preset options might be missing for one camera even if the hardware appears identical: Account Permissions:…
To manage the alarm settings for your EufyCam 2C and HomeBase when motion is detected, follow these steps in the Eufy Security app: Open…
Based on the YCC365 Plus manual and support documentation, here are the steps to address your concerns: Renewing Subscription: Open the YCC365 Plus app…
If your EufyCam 2C live stream works on Wi-Fi but not on mobile data, it usually indicates a connection or permission issue on your…
To adjust the date and time on your Tapo camera, you need to configure the Time Zone settings within the Tapo app. Follow these…
Yes, you can add more than 4 cameras to the YCC365 Plus app. While the split-screen view typically displays up to 4 cameras simultaneously…
To stop the camera from making a loud sound (buzzer/alarm) when it detects motion, you need to adjust the alarm settings in the YCC365…
To cancel a recurring cloud service subscription for the YCC365 Plus camera, simply turning off the recording feature in the app is often insufficient…
To save a clip from your playback using the scissor icon (the video clipping tool) in the YCC365 Plus app, follow these general steps:…
Based on the YCC365 Plus documentation, Smart Tracking is designed to follow moving objects automatically, but the app does not explicitly provide a setting…
If your YCC365 Plus camera is only displaying in black and white (PB), it is likely because the Night Vision mode is active or…
A blue screen in the Tapo app usually indicates a connection issue between the app and the camera's stream. Try the following troubleshooting steps:…
If your YCC365 Plus camera is frequently disconnecting or you are having trouble switching to a new network, please follow these troubleshooting steps: Check…
The exact physical location of the reset button can vary slightly depending on your specific camera model (e.g., PTZ dome vs. fixed indoor camera),…
Firmware updates for the YCC365 Plus camera are typically handled directly through the YCC365 Plus app and should never require payment to a third-party…
The YCC365 Plus app includes a power-saving feature that puts the live stream into standby to conserve battery and data. To keep the screen…
The issue you are experiencing is expected behavior when a cloud storage subscription expires. When the cloud trial ends, the app will still send…
Yes, you can view the Teckin TC100 camera on multiple mobile phones. There are two primary ways to do this using the Teckin App:…
The maximum range between the eufyCam 2C and the HomeBase 2 is typically 20-30 feet. However, the actual distance can vary significantly based on…