Camera questions & answers

This issue typically occurs when the camera is successfully recording to local storage (TF card) but the app is unable to establish a remote…

If your JOOAN T2R-U camera is not tracking movement, please check the following settings within the Cam720 app: Enable Intelligent Tracking: Open the live…

Yes, it is possible to adjust the sensitivity settings for your JOOAN T2R-U camera through the mobile application (typically the Cam720 app as indicated…

If the autotrack feature is enabled but the camera is not following movement, please try the following troubleshooting steps based on common JOOAN camera…

Based on the JOOAN T2R-U Wifi Camera manual, the Auto Track feature is a specific function that allows the camera to automatically follow moving…

While the JOOAN T2R-U supports motion detection, it is important to distinguish between Motion Detection (receiving alerts when movement is sensed) and Motion Tracking…

Based on the JOOAN T2R-U manual and the standard Cam720 app interface used by these devices, you can typically find the sensitivity settings by…

To find the detection sensitivity settings for your JOOAN T2R-U Wifi Camera, you will need to access the camera's settings menu within the mobile…

To access the camera settings for your JOOAN T2R-U Wifi Camera, follow these steps within the mobile application: Open the camera app and locate…

If the autotrack feature is enabled but the camera is not following movement, please try the following troubleshooting steps based on the JOOAN T2R-U…

On the JOOAN T2R-U Wifi Camera, Autotrack (often labeled as 'Intelligent Tracking' or 'Mobile Tracking' in the app) is a feature that allows the…

To enable motion detection on your JOOAN T2R-U Wifi Camera, you must use the mobile application (Cam720) associated with the device. Based on the…

If your YCC365 Plus camera is turning off or disconnecting automatically, it is usually related to power supply issues, Wi-Fi stability, or specific app…

By default, the YCC365 Plus camera is often set to "Event Recording," which only records when an alarm or motion is detected. To enable…

To manage and see who has access to your YCC365 Plus camera, you should check the sharing settings within the app. Follow these steps:…

It sounds like you're encountering an issue where only the initial video files on your SD card are playable, which can sometimes happen due…

To prevent your YCC365 Plus camera from entering an idle or "off" state, you should check the camera switch and recording settings within the…

If you are experiencing issues connecting multiple Tapo cameras simultaneously, consider the following troubleshooting steps: Check App Limits: Ensure you are not exceeding any…

According to the manual, only the owner account has the authority to change settings or transfer ownership. If you cannot contact the original owner…

To change the owner of the NUMLAKE TECH CAMR50-4G camera, you can use the transfer ownership feature within the Gazing app. Follow these steps:…

If your YCC365 Plus camera is failing to record automatically to the TF card despite your settings, please check the following troubleshooting steps based…

In the CamLabLite software, the grid and measurement tools are typically located within the Options or View menus. If you cannot find the grid…

The official manual for the Shangjian Technology AS03 WiFi Mini Camera specifically instructs users to download and use the iWFCam app. For Apple devices,…

To set up your Geeni Smart WiFi Floodlight Camera to turn on automatically, you can use the motion detection settings or a custom schedule…