Billboard questions & answers

If you are experiencing low volume on your Billboard BB-S32064 Carbono Sound Bar despite having both the soundbar and your source device (TV, phone,…

The user manual for the Billboard Soul Sound Wireless Speaker (Model SOULBB) does not specify a dedicated "reset" button or a specific button combination…

Based on the symptoms you described for your Billboard BB-BT-EB (BB2400) earbuds, it is highly likely that the unit is defective, especially since the…

Based on the technical specifications for the Billboard Carbono 2.1 Sound Bar (Model BB-S32064), the device is powered via a standard electric cable that…

If your Billboard BB1000 speaker is blinking white but not making a startup sound or appearing on your phone, it may be stuck in…

The documentation for the Billboard Blast 15 (BB-S32040) specifies the electrical requirements as 9V DC (9 Vcc) at 1.5 Amps, but it does not…

Based on the provided user manual, there is no mention of a developer program, API, or SDK for the Billboard True Wireless Earbuds (model…

Based on the manual for the billboard KR309DB True Wireless Fin Earbuds, the button located inside the charging case between the earbuds is used…

The official manual for the Billboard BB783 does not list a dedicated "reset" button or a specific button combination for a factory reset. However,…

Based on the manual for the Billboard PA speaker series, the "very small hole" you are referring to is likely the Micro USB charging…

To obtain parts or service for your Billboard BB2530 speaker, you should contact the manufacturer, ESI Cases & Accessories. According to the manual, they…

The instruction manual for the Billboard BB2530 does not list individual replacement parts like the panel board for direct purchase. However, the manufacturer, ESI…

To adjust the sound profile and potentially lower the bass on your Billboard BB-S32064 Carbono 2.1 Sound Bar, you should use the included remote…

The loud beeping and failure to pair on your Billboard BB742 may indicate a connection error or a firmware hang. Please try the following…

Based on the manual for the Billboard BB2761, this setup is not supported. The AUX jack on this device is an input (AUX-IN) designed…

To connect the Billboard BB2722 microphone to your audio equipment, follow these steps: 1. Ensure that your audio equipment has an XLR input. The…

The Billboard Bluetooth True Wireless Earbuds with Charging Case provide up to 10 hours of continuous use. With their true wireless stereo (TWS) design…

To pair the Billboard KR745 True Wireless Earbuds with your device, follow these steps as outlined in the user manual: 1. **Pairing One Earbud:**…

To pair the True Wireless Earhooks with your device, follow these steps: 1. **Power on the Earhooks:** Take the earbuds out of the charging…

To pair both earbuds to your device, follow these steps: 1. Ensure both earbuds are turned off. 2. Turn on both earbuds simultaneously by…

To pair the True Wireless Earbuds with your mobile device, follow these steps: 1. Make sure the earbuds are fully charged before attempting to…