The Hunter Pro-C programming has stopped and it is not working. How should I adjust it?
If your Hunter Pro-C controller has stopped working or the programming is not initiating, please check the following steps to troubleshoot and adjust the…
Manuals+ Q&A
Hunter Pro C Manual Start: User Guide for Irrigation Controller — questions & answers
Read product questions and troubleshooting answers linked to Hunter Pro C Manual Start: User Guide for Irrigation Controller.
Browse topics
Answered questions
Why is my Hunter Pro-C controller running at 5:00 AM and again at 7:00 AM, and how do I change the default 10-minute zone run times?
The issue of your Hunter Pro-C running multiple times (e.g., at 5:00 AM and 7:00 AM) is almost always caused by having multiple Start…
Can you provide help for the Hunter Pro C irrigation controller in Spanish?
Para ayudarle con su controlador Hunter Pro-C, aquí tiene los pasos básicos de programación: Configurar la fecha y hora: Gire el dial a Date/Time.…
How do I reduce the number of daily start times and select specific watering days on my Hunter Pro-C controller?
To change your Hunter Pro-C from watering twice a day to once a day, or to select specific days, follow these steps: 1. Remove…
Why is Zone 4 missing from my Hunter Pro-C controller after I changed the watering days?
If Zone 4 has disappeared from your Hunter Pro-C controller, it is likely due to one of the following reasons related to how the…
Why does the screen information disappear immediately after appearing?
If your Hunter Pro-C screen displays information briefly and then disappears, it usually indicates a power supply issue or a problem with the faceplate…
Why does my Hunter Pro-C controller repeat the watering cycle for Program A instead of shutting off?
The most common reason a Hunter Pro-C controller repeats a cycle is that multiple Start Times have been programmed for the same program. On…
Where can I find the manual for the older Hunter Pro-C irrigation controller models?
The manual for the older Hunter Pro-C (PC Series) modular controller is available on this page. You can access the original PDF versions using…
How do I program stations 5, 6, and 7 on my Hunter Pro-C controller when only stations 1-4 are visible in the program settings?
If you can manually operate all 7 stations but cannot see them during programming, it usually means the controller has not yet "recognized" the…
How do I reprogram the Hunter Pro-C controller after a power surge or electrical storm?
Electrical storms can sometimes cause the controller to behave erratically. Since you had to pull the plug to stop the system, it is recommended…
How do I perform a full factory reset on the Hunter Pro-C controller to clear all programming?
To clear all programmed data and return the Hunter Pro-C controller to its original factory defaults, follow these steps for a Full Reset: Press…
How should the rain sensor bypass switch be positioned on the Hunter Pro-C controller?
To ensure your rain sensor is functioning and able to stop watering during rain, the switch should be in the down position, which leaves…
How do I reset the Hunter Pro C irrigation controller if my house loses electricity?
If your house loses electricity, you will need to reset the Hunter Pro C irrigation controller. To do this, follow these steps: 1. Wait…