How do I fix the left earbud not producing sound and pair both Altec MZX559 NanoPods together?
If your left earbud is not producing sound or the earbuds are not pairing with each other, you should perform a Manual Reset to…
Manuals+ Q&A
Altec MZX559 NanoPods Truly Wireless Earbuds User Manual — questions & answers
Read product questions and troubleshooting answers linked to Altec MZX559 NanoPods Truly Wireless Earbuds User Manual.
Browse topics
Answered questions
How do I fix the left earbud not producing sound and pair both Altec MZX559 NanoPods together?
If your left earbud is not producing sound or the earbuds are not pairing with each other, you should perform a Manual Reset to…
Why are the touch controls on my Altec MZX559 NanoPods not responding when I try to answer a call?
If your Altec MZX559 NanoPods are playing audio but the touch buttons are not responding to commands like answering calls, please try the following…
Why is only the right earbud working on my Altec MZX559 NanoPods?
If you are only hearing audio from the right earbud, it usually indicates that the earbuds have lost their sync with each other. To…
How can I fix connection drops, pairing issues where earbuds connect separately, and inconsistent battery readings on my Altec MZX559 NanoPods?
It sounds like your NanoPods are experiencing a synchronization error between the two earbuds and potential charging contact issues. To resolve the connection and…
Why do my Altec MZX559 NanoPods keep disconnecting immediately after connecting?
If your Altec MZX559 NanoPods are frequently disconnecting, it is often due to a synchronization error or a low battery. Please try the following…
Why does my right Altec NanoPod earbud shut down immediately even after charging and resetting?
It appears you have already performed the standard troubleshooting steps for the Altec MZX559 NanoPods, including cleaning the charging contacts and performing a manual…
How do I fix my Altec NanoPods if only one earbud works at a time and a factory reset did not help?
If your Altec MZX559 NanoPods are still only playing audio from one side after a manual reset, please try the following sequence to ensure…
The left earbud is not producing sound. How can I fix this?
If your left NanoPod is not producing sound, it may have lost its connection to the right earbud or failed to power on. Please…
Why is my left NanoPod losing signal and why is the battery draining quickly after charging?
It sounds like your NanoPods may be experiencing a synchronization or firmware glitch, which can often be resolved with a manual reset. Please follow…
How do I fix my Altec NanoPods when only one earbud is working?
If only one earbud is working, your NanoPods may have lost their connection to each other. You can resolve this by performing a Manual…
Why is my right Altec NanoPod earbud not turning on?
If your right Altec MZX559 NanoPod is not turning on, please try the following troubleshooting steps based on the manual: Check the Charge: Place…
Why is my left earbud turning off after two minutes and showing a low battery charge even after charging for three hours?
It appears your left earbud is not making a proper connection with the charging pins or requires a manual reset to recalibrate the battery…
Why are my Altec NanoPods not turning on, showing indicator lights, or connecting to my phone?
It is common for new earbuds to arrive with a protective film or in a deep-discharge state. Please try the following steps to resolve…
How do I fix the left earbud if it is not turning on or producing sound?
If your left NanoPod is not working or turning on, please try the following steps based on the manual: Check Power: Place the earbud…
Why are my Altec NanoPods pairing as separate devices and not working together as a stereo pair?
It appears your NanoPods have lost their internal synchronization, causing them to enter 'Solo Mode' where each earbud acts as a separate Bluetooth device.…
Why won't my Altec MZX559 NanoPods turn on, and why are the four blue LEDs on the charging case staying on constantly?
It appears your Altec MZX559 NanoPods or the charging case may be defective, especially since the four blue LEDs on the case remain illuminated…