Where is the black box in the fan to change the code for the SQM DL-4112T remote control?
To change the code for your SQM DL-4112T remote control and fan, you need to locate the receiver, which is typically installed within the…
Manuals+ Q&A
SQM DL-4112T Remote Control User Manual — questions & answers
Read product questions and troubleshooting answers linked to SQM DL-4112T Remote Control User Manual.
Browse topics
Answered questions
How do I individualize multiple SQM DL-4112T remote controls to prevent them from controlling fans in other rooms?
The issue you are experiencing is caused by multiple remotes being set to the same frequency (DIP switch settings). To individualize each fan, you…
How can I prevent the ceiling fan light from turning on randomly at night?
The issue of your light turning on randomly is typically caused by signal interference from other nearby remotes or electronic devices. The SQM DL-4112T…
How do I prevent one remote from controlling multiple fans in different rooms?
The issue you are experiencing is caused by all three fans and remotes being set to the same frequency (DIP switch settings). To resolve…
Why does my fan turn on by itself throughout the day?
If your fan is turning on by itself, it is likely due to signal interference from other nearby devices or remotes using the same…
Do I need to match the dip switch numbers on the fan receiver to the ones on the remote control?
Yes, to ensure the remote control communicates correctly with your fan, you must match the code settings on both the transmitter (remote) and the…
How do I turn off the light independently without turning off the fan on the SQM DL-4112T remote?
According to the SQM DL-4112T manual, the light and fan functions are controlled by separate buttons. To turn off the light only, you should…
Where is the button to rotate the fan direction on the SQM DL-4112T remote control?
Based on the SQM DL-4112T manual, the button used to change the fan direction (forward or reverse) is typically located on the face of…
How do I change the fan speed on the SQM DL-4112T Remote Control?
To change the fan speed on the SQM DL-4112T Remote Control, use the "LOW," "MED," and "HI" buttons. Here is a breakdown of each…