Can I add additional sensors to the eMACROS receiver at a later date?
Yes, you can add additional sensors to your system at a later date. The eMACROS wireless solar driveway alarm system is designed to be…
Manuals+ Q&A
eMACROS 1/2 Mile Long Range Solar Wireless Driveway Alarm Outdoor Weather Resistant Motion Sensor & Detector-Complete Features/User Guide — questions & answers
Read product questions and troubleshooting answers linked to eMACROS 1/2 Mile Long Range Solar Wireless Driveway Alarm Outdoor Weather Resistant Motion Sensor & Detector-Complete Features/User Guide.
Browse topics
Answered questions
Why is my eMACROS HS-002C base station not making any sound even though the sensor flashes red when I walk in front of it?
If your sensor flashes red but the base station remains silent, please check the following troubleshooting steps for your eMACROS HS-002C system: Check Base…
How do I increase the volume of the eMACROS driveway alarm base station?
To adjust the volume on your eMACROS Base Station, please follow these steps: Locate the Volume + and Volume - buttons on the Base…
Why does my eMACROS driveway alarm indicate 'B power low' even after installing new batteries?
The "B power low" (or Base power low) alert typically refers to the Base Station rather than the outdoor sensors. Even if you have…
Why is my eMACROS base station not producing sound even though the lights are on?
Based on the user guide for the eMACROS 1/2 Mile Long Range Solar Wireless Driveway Alarm, please check the following to troubleshoot your base…
Why is my driveway alarm sounding a different chime randomly when no one is there?
Based on the eMACROS user guide and common system behavior, there are a few reasons why your alarm might be sounding a different chime…
Why is my driveway alarm triggering on Channel 1 when I have it set to Channel 3?
It sounds like there may be a configuration mismatch or a ghost signal triggering Channel 1. Based on the eMACROS manual, here are the…
Can I add additional sensors to my existing eMACROS receiver, or do I need to buy a new receiver for every sensor?
Yes, you can add additional sensors to your existing receiver without needing to purchase a new receiver for each one. According to the user…
Why does my eMACROS solar driveway alarm work during the day but fail to detect motion at night?
The eMACROS 1/2 Mile Long Range Solar Wireless Driveway Alarm does not have a built-in sleep pause or time schedule feature; it is designed…
How do I install the eMACROS 1/2 Mile Long Range Solar Wireless Driveway Alarm?
To install the eMACROS 1/2 Mile Long Range Solar Wireless Driveway Alarm, follow these steps: 1. Base Station: - Plug the Base Station into…