Shelly questions & answers

To control your roller shutters (equipped with Shelly Plus 2PM) using the Shelly BLU Remote Control ZB, you need to pair the remote with…

To reset your Shelly GU10 Duo Smart Bulb, you must perform a power cycle sequence. Follow these steps: Turn the power to the bulb…

Yes, it is possible. The Shelly H&T Gen3 is part of the Shelly Gen3 series, which is designed to support Matter. According to Shelly's…

Yes, it is possible to recalibrate the Device. According to the technical documentation, calibration must be performed on a new device, after a factory…

The Shelly Plus i4 is an input controller designed to trigger actions and scenes. Here are concrete examples of how it can be used:…

The Shelly RGBW2 manual does not provide a specific wiring diagram for external amplifiers, as it is designed to control LED strips directly within…

Based on the Shelly Plus Smoke user guide, you can monitor and receive notifications from the device via the Shelly Cloud app, but there…

The Shelly BLU H&T is a smart Bluetooth humidity and temperature sensor. Below are the primary instructions for its use and operation: Initial Setup:…

To reset your Shelly 1PM Gen4, you can use the following methods depending on your connectivity mode: Zigbee Reset: Click the physical reset button…

If the setup for your Shelly Plus Smoke is not working, please follow these initial hardware steps to ensure the device is active and…

Yes, the Shelly UNI can be used with pulse-emitting devices. The device features two digital inputs that can detect logical states based on voltage…

To configure the Shelly Cloud application for your Shelly Plus 1, follow these steps: Registration: Download the Shelly Cloud app and create an account…

To reset your Shelly Button 1, you must access the internal reset button. Follow these steps: Locate the button: You need to remove the…

Yes, you can integrate the Shelly Plus 1 with a FritzBox, though it is not a native "Plug & Play" integration like Fritz!DECT devices.…

For controlling a garage door opener like the Normstahl EntreMatic Magic 600-3, the Shelly 1 (or its newer version, the Shelly Plus 1) is…

To achieve this automation using URL commands (Direct Device-to-Device Actions), you will need to configure the Shelly Door/Window 2 to send an HTTP request…

The "Something is wrong" error when saving Sunrise/Sunset schedules usually indicates that the device cannot determine your geographical location or does not have a…

Based on the technical specifications for the Shelly 3EM-63W Gen3, there is some uncertainty regarding its compatibility with a 110V-only system. The manual states…

The switch you see illustrated on the device case between L (Line) and O (Output) is not a physical switch you need to install,…

It appears your Shelly device is shutting down because the 2000W load of your water heater exceeds its operational capacity or has triggered a…

By default, the Shelly Pro 4PM will maintain its current state (the last state it was in) if it loses internet connectivity. It does…

The device described in this manual is the Shelly Pro 1. According to the specifications and wiring diagrams provided, this specific model already supports…

According to the Shelly 3EM User Guide, if you have lost access to the device due to forgotten credentials or if the device is…

The Shelly 3EM is capable of measuring both incoming and outgoing energy (bidirectional) using the current transformers (CT clamps) included in the package. It…