Shelly GU10 Duo Smart Bulb
Read before use
This document contains important technical and safety in formation about the device, its safety use and installation. & CAUTION! Before beginning the installation, please read this guide and any other documents accompanying the device carefully and completely. Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial guarantee (if any). Shelly Europe Ltd. is not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure of following the user and safety instructions in this guide.
Product Introduction
Shelly® is a line of innovative microprocessor-managed devices, which allow remote control of electric circuits through a mobile phone, tablet, PC, or home automation system. Shelly® devices can work standalone in a local Wi-Fi network or they can also be operated through cloud home automation services. Shelly Cloud is a service that can be accessed using either an Android or iOS mobile application or with any internet browser at https://control.shelly.cloud/. Shelly® devices can be accessed, controlled, and monitored remotely from any place where the user has internet connectivity, as long as the devices are connected to a Wi-Fi router and the Internet. Shelly® devices have an Embedded Web Interface accessible at http:/1192.168.33.1 when connected directly to the device access point, or at the device IP address on the local Wi-Fi network. The embedded Web Interface can be used to monitor and control the device, as well as adjust its settings. Shelly® devices can communicate directly with other Wi-Fi devices through HTTP protocol. An API is provided by Shelly Europe Ltd. For more information, please visit: https://shelly-api-docs.shelly.cloud/#shelly-family-overview. Shelly® devices are delivered with factory-installed firmware. If firmware updates are necessary to keep the devices in conformity, including security updates, Shelly Europe Ltd. will provide the updates free of charge through the device embedded Web Interface or Shelly Mobile Application, where the information about the current firmware version is available. The choice to install or not the device firmware updates is user’s sole responsibility. Shelly Europe Ltd. shall not be liable for any lack of conformity of the device caused by failure of the user to install the provided updates in a timely manner.
Installation Instructions
The Shelly DUO (:NW/CW or RGBW model) smart Wi-Fi LED bulb by Shelly Europe Ltd. is intended to be installed into a standard light socket (E27 or GU10) in order to change the white temperature or color (depending on model) and to dim the light Shelly may work as a standalone device or as an accessory to a home automation controller.
- CAUTION! Danger of electrocution. Installing the device to the power grid has to be performed with caution.
- CAUTION! Danger of electrocution. Before installing or removing the Device please check that the breakers are turned off and there is no voltage at the light socket contacts. This can be done with a phase tester or multimeter.
- CAUTION! Use the Device only with power grid which comply with all applicable local regulations. Short circuit in the power grid connected to the Device may damage the Device.
- CAUTION! Please check the working voltage of the device and the supplied voltage of your power grid before installing the device! Installing the device to a non-recommended power supply may lead to malfunction, danger to your life or violation of the law. Shelly Europe Ltd. is not responsible for any loss or damage in case of incorrect installation or operation of this device.
- CAUTION! Please handle with care’ The Shelly® DUO is FRAGILE!
Specification
Initial Inclusion
If you choose to use the Device with the Shelly Smart Control mobile application and cloud service, instructions on how to connect the Device to the Cloud and control it through the Shelly Smart Control app can be found in the mobile application guide.
The Shelly mobile application and Shelly Cloud service are not conditions for the Device to function properly. This Device can be used standalone or with various other home automation platforms and protocols.
CAUTION! Do not allow children to play with the buttons/ switches connected to the Device. Keep the Devices for remote control of Shelly (mobile phones, tablets, PCs) away from children.
Declaration of conformity
Hereby, Shelly Europe Ltd. declares that the radio equipment type Shelly DUO and Shelly DUO RGBW is in compliance with Directive 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/ EU. The full text of the EU declaration of conformity is available at the following internet address:
https://shelly.link/DUO-WW-CW_DoC and
https://shelly.link/DUO-RGBW_DoC
Manufacturer: Shelly Europe Ltd.
Address: 51 Cherni Vrah Blvd., bldg. 3, fl. 2-3, 1407 Sofia, Bulgaria
Tel.: +359 2 988 7435
E-mail: support@shelly.cloud
Web: http://www.shelly.com
Changes in the contact data are published by the Manufacturer at the official website of the Device: http://www.shelly.com
All rights to trademark Shelly® , and other intellectual rights associated with this Device belong to Shelly Europe Ltd.
For UP PSTI Act Statement of Compliance scan the QR code
Documents / Resources
 |
Shelly GU10 Duo Smart Bulb [pdf] User Guide GU10, GU10 Duo Smart Bulb, Duo Smart Bulb, Smart Bulb, Bulb |