How do u fix error Eo7

On Goplus treadmills, the E07 error code typically indicates a Safety Key issue. This occurs when the safety key is not properly detected by the console, preventing the treadmill from starting or causing it to stop abruptly.

To fix this, please try the following steps:

• Check the Safety Key: Ensure the red safety key is correctly placed in its designated slot on the console. It must be magnetically engaged for the treadmill to operate.
• Clean the Contacts: Wipe the safety key and the contact area on the console with a dry cloth to remove any dust or debris that might be interfering with the connection.
• Inspect for Damage: Check if the safety key magnet is missing or if the sensor area on the console appears damaged.
• Power Cycle: Turn off the main power switch, wait 30 seconds, and turn it back on with the safety key firmly in place.

If the error persists after ensuring the safety key is correctly positioned, there may be a fault with the internal reed switch (the sensor that detects the magnet). In this case, you should contact Goplus technical support or refer to your warranty documentation for further assistance.