What does error code 1 mean?

According to the INVERX X30 AI Wireless Robotic Pool Cleaner manual, Error Code 1 indicates a Left drive error.

To troubleshoot and clear the error, you can try the following steps:

• Restart the robot: Insert the magnetic safety cap into the robot for 5 seconds, then remove it to reset the unit.
• Clear the code: Pressing the power button on the robot or connecting it to the charger will also clear error codes.
• Check for obstructions: Ensure there is no debris stuck in the left track or drive system.

If the error code cannot be cleared after these steps, the manual recommends contacting your authorized dealer for further assistance.