Why are all LEDs flashing green on my WYBOT A1 and why does it stop moving after 20 seconds?
Based on the WYBOT A1 (OS2010) manual and troubleshooting guide, here are the steps to address your issue: Check the Flipper: The most common…
Manuals+ Q&A
Robotic Pool Cleaner questions & answers
Browse answered questions about Robotic Pool Cleaner, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How do I turn the knob to start the cleaning process on the Bubot 700?
Based on the Bubot 700 (C10E) manual, the knob is primarily used during the App Registration & Connection process. If the knob feels stuck…
Where can I find a replacement power supply or charger for the AIRROBO PC200 Lite Series robotic pool cleaner?
To obtain a replacement power supply for your AIRROBO PC200 Lite Series, it is important to follow the manufacturer's safety guidelines. The manual explicitly…
Where can I buy a replacement filter tray for the Ofuzzi Cyber 1000?
The user manual for the Ofuzzi Cyber 1000 does not list specific retailers or a direct parts catalog for purchasing a replacement filter tray.…
Why is my Inverbot M60 making a low-pitched whining noise when switched off and while charging?
While the manual for the iNVERBOT X60 series does not explicitly list a "low-pitched whining noise" as a standard operating sound, it does provide…
Should the BEABOT Aqua Sense remain on the charger during winter storage?
For winter storage of the BEABOT Aqua Sense Intelligent Robotic Pool Cleaner, it is generally recommended to follow standard lithium-ion battery maintenance practices, as…
Why does my BWT D500 robotic pool cleaner stop after a few minutes even though the filter, propeller, and traction are fine?
Bonjour, D'après le manuel d'utilisation du BWT D500, si le robot démarre et s'arrête après un court instant (CLEANER STARTS AND SHUTS OFF AFTER…
Why does my BWT D Series robotic pool cleaner shut off and go into standby after only 2 minutes?
Based on the troubleshooting section for the BWT D Series (D400, D500, D600), if your cleaner starts and shuts off after a short time,…
When operating the Poolmate Hydro4 robotic pool cleaner without the app, is there only one cleaning mode, and if not, how do you select different modes?
When operating the Poolmate Hydro4 without the mobile app, the device typically defaults to its standard automatic cleaning cycle. According to the manual, manual…
Why won't my Aiper Scuba S1 Pro robotic pool cleaner charge?
If your Aiper Scuba S1 Pro is not charging, please follow these troubleshooting steps based on the user manual: Check for Moisture: Before charging,…
Why is my Redkey S100 robotic pool cleaner beeping intermittently and not working even though it is charged?
According to the Redkey S100 manual, an intermittent beep or alarm sound when the cleaner is lifted out of the pool is a standard…
Does the Dolphin S 2000 robotic pool cleaner map the pool to ensure full coverage every time it runs?
Yes, the Dolphin S 2000 utilizes advanced cleaning technology designed to provide reliable and efficient coverage of the entire pool. While the manual does…
What is the purpose of the black plastic strip included with the WYBOT C2?
Based on the provided manual for the WYBOT C2, there is no specific mention of a "black plastic strip" in the parts list or…
How can I claim my warranty for an Aiper Scuba S1 that is overheating and has housing deformation?
To claim your warranty for the Aiper Scuba S1, you should contact Aiper Customer Service directly. The product comes with a 24-month warranty covering…
Are finer filters available for purchase for the OUCAXIA Y50S?
The OUCAXIA Y50S comes standard with a 180 μm (micrometer) filter basket. The provided manual does not list optional finer filter grades or specific…
Why does my WYBOT A1 turn on, show blue lights for a second, and then immediately turn off without starting?
Based on the WYBOT A1 manual, here are the potential causes and steps to resolve the issue where the device turns off immediately after…
How do I configure the BWT F1RXT with the app if it is not appearing in the device list?
To configure your BWT robotic pool cleaner with the BWT Best Water Home App, please ensure you are following these steps based on the…
Why is my WYBOT Osprey 700 spinning in circles and why is the left drive wheel and rubber roller not turning?
Based on your description that the WYBOT Osprey 700 is spinning in circles and the left drive wheel/rubber roller is not engaging, there is…
Why do leaves keep getting stuck in the impeller of my Dolphin S150, and how can I prevent having to remove the impeller every time I clean the filter?
It is unusual to have to remove the impeller every time you clean the filter. If leaves are consistently bypassing the filter basket and…
How do I know when to replace the clarifier kit and if it is being applied correctly?
The Beatbot AquaRefine™ Kit (3-in-1 Clarifier) is an optional accessory for the AquaSense 2. Based on the product documentation and available details: Replacement Timing:…
Why does the Seauto app freeze when connecting to the Crab robot on an iPhone 16 Pro?
If the Seauto app is freezing during the connection process with your Crab robot, please verify the following requirements based on the manual's troubleshooting…
Why is my WYBOTICS Osprey 700 turning upside down in the deep end of the pool?
Based on the WYBOTICS Osprey 700 manual, if your cleaner is turning upside down or struggling with pool navigation, please check the following: Trapped…
Why is there no blue light when I turn on my HDPEAK MF-PC01 pool cleaner even though the charger shows green?
Based on the troubleshooting guide for the HDPEAK MF-PC01, if the cleaner does not work and the indicator light does not turn on even…
Why is my HDPEAK MF-PC01 pool cleaner not working even though the light is green?
If your HDPEAK MF-PC01 pool cleaner has a green light but is not moving, please check the following steps based on the user manual:…