How do I fix a bright LED light that won't go away at the base of my daughter's G-C0308 camera?

Based on the model number G-C0308, this is likely a baby monitor or security camera. A persistent bright LED at the base usually indicates a status or connectivity issue. Please try the following steps:

• Check Connection: A solid light often means the camera is powered but not connected to the Wi-Fi or the parent unit. Try re-pairing the device through your mobile app or monitor settings.
• Night Vision Settings: If the light is a faint red glow, it is the Infrared (IR) LED for night vision. If it is a bright white light, check the app settings to see if a "Spotlight" or "Status Light" feature is toggled on.
• Power Cycle: Unplug the camera from the power source for 30 seconds and plug it back in to reset the hardware state.
• Factory Reset: Look for a small pinhole or button labeled 'Reset' on the back or bottom. Press and hold it for 10 seconds while the device is powered on.

Note: Specific instructions may vary as the full manual for this specific model is not currently in our database. If these steps do not work, please check the manufacturer's app for specific error codes.