Q-TRAN Micro 5 Series Mini LED Fixture

Mounting

NOTE: 2 clips provided for 4’ or less; 4 clips provided for greater than 4’

Stainless Steel Clip (SST-08)

Screw Mounting

Millwork Mounting – SST Clip

832 Silicone MountingNOTE: Apply silicone in a well ventilated area. 832 Silicone is sold with caulking gun. Do not use in any submersible applications.

VHB Mounting

NOTES: • Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void

Magnet Mounting

1. Using the #6 Flat head screws, mount screws into the magnet bracket through the drilled holes
2. Adjust magnet location by applying rubber stoppers.
3. Connect the assembled fixture to the magnet bracket, the install should match the section view.

NOTE: The magnet clips should be offset to the flat heads used to secure the bracket, to maximize magnetic connection.

Millwork Mounting – Magnet

NOTE: For millwork with magnets, adhesive must be used to complete install.

© 2022 Q-Tran Inc. All rights reserved
155 Hill St. Milford, CT 06460
203-367-8777
sales@q-tran.com
www.q-tran.com
Specification subject to change. Rev-03-31-22

Documents / Resources

Q-TRAN Micro 5 Series Mini LED Fixture [pdf] Installation Guide Micro 5 Series Mini LED Fixture, Micro 5 Series, Mini LED Fixture, LED Fixture, Fixture

References

• User Manual