Q-TRAN LUME-01-RGB Q-CAP Flexible
Mounting
NOTE: 2 white snug clips provided per first 12″, 1 for each additional 12″.
Other mounting styles incur additional charge, see price guide for details.
WSC: WHITE SNUG CLIP
- For indoor/outdoor use
- Surface mounting
- Stainless steel/corrosion resistant
- Discrete mounting
- White glossy finish
MOUNTING HARDWARE
- #6 flat screw (one provided for each clip)
- 832 Silicone (sold separately)
MC: MAGNETIC CLIP
- For indoor/outdoor use
- Steel clip
- Neodymium magnet
- Easy install
- Easily detachable
- For inaccessible locations such as cove area
- White glossy finish
MOUNTING HARDWARE
- #6 flat screw (one provided for each clip)
- 832 Silicone (sold separately)
LUME-PPS-LP-CL-2: PC LOW PROFILE MOUNT CLIP
- Clear Polycarbonate (PC)
- For indoor/outdoor use
- Surface mounting
- No wire way
- Can be mounted with or without
PPS-BRACKET (COVE FRIENDLY)
MOUNTING HARDWARE
- #8 Flat head screw (1 screw for every 16″)
- 832 Silicone (sold separately)
LUME-PPS-LP-CL-96 & LUME-PPS-LP-CL-FT: PC LOW PROFILE MOUNT CHANNEL
- Clear Polycarbonate (PC)
- 96″ (PPS-LP-CL-96) or custom length (PPS-LP-CL-FT)
- For indoor/outdoor use
- Surface mounting
- Low profile mounting
- No wire way
- Can be mounted with or without
PPS-BRACKET (COVE FRIENDLY)
MOUNTING HARDWARE
- #8 Flat head screw (1 screw for every 16″)
- 832 Silicone (sold separately)
Mounting Accessories
Q-ANGLE (Full ordering guide and installation available for this product in the accessories section of website)
- Offset lighting to illuminate signs, artwork, etc.
- For indoor/outdoor use
- Wall, ceiling, or floor mounted
- Anodized aluminum/corrosion resistant
- Free moving rotating head which can be locked into specific angles
- Preset dial notches for easy adjustments from 90° to 270°
MOUNTING HARDWARE
- White Snug Clip
- 6-32 Fillister head screw
- 4-40 Flat head screw
- Drywall anchor (not provided)
- #6- 1 ¼ ” wood screw
Q-ANGLE MUST BE MOUNTED EVERY 12″
SEE Q-ANGLE INSTALL FOR MORE INFORMATION
Rated
DRY
- Lengths up to 191″
- Encapsulated in polyurethane
- NOT FIELD CUTTABLE
COMPATIBLE CONNECTORS
WET
- Lengths up to 191″
- Encapsulated in polyurethane
- NOT FIELD CUTTABLE
COMPATIBLE CONNECTORS
Lens with LED visibility
Connectors
Type
Order the PPS-LP-CL-2 to support two fixtures together with no visible break and order the PPS-LP-CL-96/PPS-LP-CL-FT to support the fixture
Connectors/Wire
BARE WIRE
- Belden wire 22 AWG
- Outdoor rated
- 24″ Standard length
DRY BARREL
- 22 AWG
- Dry rated
- 6″ Standard length including connector
WET BARREL
- 22 AWG
- Wet rated
- 6″ Standard length including connector
Related Products
*Full ordering guide available for this product in the accessories section of website
Documents / Resources
 |
Q-TRAN LUME-01-SC Q-CAP Flexible Fixtures [pdf] User Manual LUME-01-SC Q-CAP Flexible Fixtures, LUME-01-SC Q-CAP, Flexible Fixtures, Fixtures |
