PYLE PMX462 3 Channel Audio Mixer With USB Interface User Guide

California Prop 65 Warning
WARNING:
This product may expose you to chemicals, which is known to the state of California to cause cancer, birth defects and other reproductive harm. Do not ingest.
For more info go to: www.P65warnings.ca.gov

Technical Specs:

Power Supply: DC 5V/1A
Phantom Power: +48V

Frequency Range: 20Hz-20KHZ±1dB+4dBμ@1KHZv
T.H.D.: ≤0.5%@+4dBμ (22HZ-22KHZ)

EQ Range: Bass ±15dB/80Hz, High ±15dB/12kHz
USB Interface: SB 2.0, Windows 98SE+, macOS

Power Supply: USB, DC 5V/1A
Dimensions (L x W x H): 9.06’’ x 9.06’’ x 2.17’’ -inches

Features:

Preset 16 Digital Eects
Built-in SUB Output, EQ Control for MP3 Player
Can Choose 6 Kinds of Sound Eects Normal/ Rock/ POP/ Classical/ Jazz/ Country)
Flexible Connectivity for a Variety of External Devices
Ultra-Low Noise Design with High Headroom
Integrated Sound Card for Computer Recording Support
USB Interface: Connect to Mac / PC
Smooth Rotary-Style Faders for Mic/USB/Line/Master Controls
Extremely Musical 2-Band EQ & Pan, on Each Channel
Combo Microphone Jack Connector – XLR and 6.35 Jack
2 XLR+6.35 JACK (L/R) Stereo Input and Output Connectors
Voice Echo Eect/Delay Features
Audio Signal CLIP LED Indicator Lights
Input Selection / Control Buttons
Independent Channel + MASTER Volume Controls
Independent Channel Balance/High + Low-Frequency Adjustment
Universal Digital Audio File Compatibility

What’s in the Box:

Mixer Interface
USB Cable
Wall Adapter

Technical Specs:

Power Supply: DC 5V/1A
Phantom Power: +48V
Frequency Range: 20Hz-20KHZ±1dB+4dBμ@1KHZ

T.H.D.: ≤0.5%@+4dBμ (22HZ-22KHZ)
EQ Range: Bass ±15dB/80Hz, High ±15dB/12kHz
USB Interface: SB 2.0, Windows 98SE+, macOS

Power Supply: USB, DC 5V/1A
Dimensions (L x W x H): 9.06’’ x 9.06’’ x 2.17’’ -inches

Features:

Rugged, Metal Chassis & Exquisite Panel on 2 Sides
Preset 16 Digital Eects
Built-in SUB Output, EQ Control for MP3 Player

Can Choose 6 Kinds of Sound Eects Normal/ Rock/ POP/ Classical/ Jazz/ Country)
Flexible Connectivity for a Variety of External Devices
Ultra-Low Noise Design with High Headroom

Integrated Sound Card for Computer Recording Support
USB Interface: Connect to Mac / PC
Smooth Rotary-Style Faders for Mic/USB/Line/Master Controls

Extremely Musical 2-Band EQ & Pan, on Each Channel
Combo Microphone Jack Connector – XLR and 6.35 Jack
4 XLR+6.35 JACK (L/R) Stereo Input and Output Connectors

Voice Echo Eect/Delay Features
Audio Signal CLIP LED Indicator Lights
Input Selection / Control Buttons

Independent Channel + MASTER Volume Controls
Independent Channel Balance/High + Low-Frequency Adjustment
Universal Digital Audio File Compatibility

What’s in the Box:

Mixer Interface
USB Cable

Wall Adapter

Technical Specs:

Power Supply: DC 5V/1A

Phantom Power: +48V
Frequency Range: 20Hz-20KHZ±1dB+4dBμ@1KHZ
T.H.D.: ≤0.5%@+4dBμ (22HZ-22KHZ)

EQ Range: Bass ±15dB/80Hz, High ±15dB/12kHz
USB Interface: SB 2.0, Windows 98SE+, macOS
Power Supply: USB, DC 5V/1A

Dimensions (L x W x H): 11.22’’ x 9.06’’ x 2.17’’ -inches

For the best results and satisfaction with your new unit, please read this manual thoroughly and retain it for future reference.

ATTENTION
To avoid the possibility of malfunction, product damage, data loss, or harm to other property, please follow the points below.

OPERATION AND MAINTENANCE

Do not use the device near a TV, radio, stereo equipment, mobile phone, or other electronic devices. Doing so may cause noise interference.
To prevent panel discoloration, unstable operation, or internal damage, do not expose the device to excessive dust, vibration, or extreme temperatures (e.g., direct sunlight, near a heater, or inside a car during the day).

Do not place vinyl, plastic, or rubber objects on the device, as they may discolor the panel.
When cleaning the device, use a dry, soft cloth. Avoid using paint thinners, solvents, cleaning uids, or chemically treated wiping cloths.
Rapid or drastic temperature changes may cause condensation inside the device. For example, moving the device between locations or turning an air conditioner on or o can create condensation. If condensation occurs, leave the device o for several hours to dry completely before use.

Avoid setting all controls to their maximum. Depending on the connected devices, this may cause feedback or damage the speakers.
When powering on your audio system, always turn on the power amplier last to prevent speaker damage. When turning the system on turn off the power applier first for the same reason.

PRECAUTIONS WHEN USING THE USB 2.0 AND 5V DC TERMINALS
When connecting the USB 2.0 terminal to a computer, follow these precautions to avoid crashes, malfunctions, or data loss:

Use a USB 2.0 cable (USB 3.0 cables are incompatible).
Disable any power-saving modes (e.g., suspend, sleep, standby) on the computer before connecting to the USB terminal.
If the computer or mixer crashes, restart the application software or computer operating system, or disconnect and reconnect the mixer before powering it on again.

PMX462 3 CHANNEL MIXER
PMX464 4 CHANNEL MIXER
PMX466 CHANNEL MIXER
CHANNEL INPUT AND OUTPUT

[MIC/LINE] Mono input for connecting microphones, musical instruments, or audio devices (e.g., CD players). Supports XLR and unbalanced 1/4″ plugs.
UNBALANCED 1/4″ PLUG
[GAIN] Controller: Adjusts the basic volume of each channel. If the [PEAK] LED indicator ashes, reduce the volume by turning this control counterclockwise.

[HIGH] Controller: Adjusts treble tones by enhancing or attenuating up to ±15 dB at 12 kHz.
[LOW] Controller: Adjusts bass tones by enhancing or attenuating up to ±15 dB at 80 Hz.
[FX] Controller: Adjusts the signal level sent to the reverb line. For stereo channels, mixes L and R signals before sending them to the reverb line.

[PEAK] LED Indicator: Flashes when input or equalized signal volume is too high. Reduce the volume using the [GAIN] controller.
[LEVEL] Controller: Balances the volume of each channel
[STEREO INPUT] Jacks: Connect to line-level devices (e.g., electric keyboards) via 6.35 mm plugs. When only the L (MONO) jack is connected, the mixer outputs the same mono signal to both L and R outputs.

[AUX IN] 3.5 mm jack: Auxiliary input for external devices.
[MAIN OUT] Output: Connect to an active speaker or amplier.
[SUB OUT] Sends audio signals to the SUB output for monitoring or recording.

[PHONES] Jacks: Support 3.5 mm or 6.35 mm stereo headphone plugs.
[POWER] Button: Powers the mixer on or o.

[CH/USB] Switch: Selects the input signal from either “channel” or “USB.”
[+48V PHANTOM POWER] Button/LED: When enabled, provides DC +48V phantom power to XLR plugs on mono MIC inputs. Necessary for condenser microphones requiring phantom power.
[MAIN LEVEL] Fader: Adjusts the overall volume output from the [MAIN OUT].

[SUB] Fader: Controls the SUB output volume.
[PHONES LEVEL] Controller: Adjusts headphone volume.
[DSP Select]: Assigns one of 16 eect programs (e.g., Hall, Room, Reverb) to the mix.

[DELAY] Controller: Adjusts the depth of the reverb eect.
[PARAMETER CONTROL IN ADDING DIGITAL EFFECTS]: Fine-tunes eect depth, speed, etc.
[FX] Controller: Adjusts the volume of the eect.

[POWER INDICATOR]: Lights up when the mixer is powered on.
[LEVEL INDICATORS]: Displays signal levels from [MAIN OUT]. Lower the volume using the [LEVEL] controller if the [PEAK] indicator shows red.

MP3 FUNCTION INTRODUCTION
A. Wireless Bluetooth Connection

Press the “MODE” button to select Bluetooth mode.
The BT icon will ash on the display.
Open Bluetooth settings on your device to pair.
A sound prompt conrms successful pairing.

B. Button Functions

[ /SET]: Press once to pause playback. Press again to resume.
[ /-]: Short press to play the previous track.
Press and hold to reduce volume.
[ /+]: Short press to play the next track.
Press and hold to increase volume.
[MODE]: Switches between USB, REC, and Bluetooth modes.

C. USB Recording

Press “MODE” to select REC.
Press [ /REC] to start recording. The LED screen shows recording time.

Press [ /REC] again to pause recording.

D. Computer Sound Card
When connected via USB cable, the mixer enters PC playback mode automatically. Wait for driver installation upon rst connection.

E. EQ Control
Choose from six sound eects: Normal, Rock, Pop, Classic, Jazz, and Country.

BUILT-IN DSP
You can assign one of 16 eect programs to your mix.
The eects list is as follows:

01.HALL1	09.285MS DELAY
02.HALL2	10.560MS DELAY
03•ROOM1	11.860MS DELAY
04.R00M2	12.1000MS DELAY
05.REVERB+DELAY	13.1400MS DELAY
06.125MS DELAY	14.800MS PINGPONG DELAY
07.175MS DELAY	15.1000MS PINGPONG DELAY
08.225MS DELAY	16.1400MS PINGPONG DELAY

USB FOR DATA TRANSFER AND RECORD, AND POWER SUPPLY
USB FOR POWER SUPPLY ONLY

Use the following specifications:

Output voltage: 4.8 V to 5.2 V

Output current: 1A or higher

FCC INFORMATION

WARNING:
Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Register Product
Thank you for choosing PyleUSA. By registering your product, you ensure that you receive the full benets of our exclusive warranty and personalized customer support. Complete the form to access expert support and to keep your PyleUSA purchase in perfect condition.

Start Here

Model Number:
PMX462
PyleUSA.com/pages/register
http://www.pyleusa.com/

Questions or Comments?
We are here to help!
Phone: 1.718.535.1800
PyleUSA.com/ContactUs

Visit Our Website

SCAN ME
PyleUSA.com

Documents / Resources

PYLE PMX462 3 Channel Audio Mixer With USB Interface [pdf] User Guide
PMX462, PMX464, PMX466, PMX462 3 Channel Audio Mixer With USB Interface, PMX462, 3 Channel Audio Mixer With USB Interface, Audio Mixer With USB Interface, USB Interface, Interface

References

User Manual

What’s in the Box:

Technical Specs:

Features:

What’s in the Box:

Technical Specs:

FCC INFORMATION

Documents / Resources

References

Leave a comment

Cancel reply