Onn. LED Speaker Quick Start Guide
Model: BM2020
What's in the Box?
- 1. Bluetooth Speaker
- 2. Strap
- 3. Charging Cable
- 4. Quick Start Guide
Get to Know LED Speaker
1. Light key: Controls lighting effects.
2. Volume -: Short press to decrease volume. Long press for previous song.
3. Volume +: Short press to increase volume. Long press for next song.
4. Power: Press and hold for 2 seconds to turn on or off.
5. Charging indicator: LED lights up red while charging, turns off when fully charged.
6. Charging port: Connect the charging cable here.
7. Reset key: Insert a pointed object to restart the device.
Power on/off & Bluetooth Pairing
Press and hold the power button for 2 seconds to turn the device on or off.
Bluetooth activates automatically upon powering on. On your phone, search for the pairing name "onn. LED SPK GRY" and click to connect.
Disconnect/Reconnect Bluetooth: Short press the power button 3 times.
Start/Close Siri: Short press the power button 2 times.
Play Music
Play/Pause: Short press the light key (button 1).
Volume Control: Use the Volume - and Volume + buttons (2 and 3).
Song Navigation: Long press Volume - for the previous song; long press Volume + for the next song.
Answer/End/Reject a Call
Answer Call: Short press the power button (button 4) when a call comes in.
End Call: Short press the power button (button 4) during a call.
Reject Call: Long press the power button (button 4) for 2 seconds when a call comes in.
Light Mode
Switch Lighting Effect: Short press the light key (button 1) once.
Turn Lighting On/Off: Short press the light key (button 1) twice.
Clear Pairing Records and Reset Speaker
To clear all pairing records, press and hold the power button (button 4) for 5 seconds.
If you encounter difficulties, insert an insulated pointed object (like a toothpick) into the reset key (button 7) to restart the device.
Charging and Connect Outside Audio
It is recommended to use a 5V DC output USB charging device. Avoid using non-5V DC output devices.
To maintain battery lifespan, charge the battery fully at least once every 45 days.
Charging Indicator: The LED is red while charging and turns off when the battery is full.
Technical Information & Support
Party sync mode compatible models:
- AAABLU100006839
- AAABLU100006889
- AAAGRY100006839
- AAAGRY100006889
- AAAAQU100006839
- 100008734
- AAAGRY100006897
- 100008736
- AAAAQU100006897
- AAAGRY100006896
- AAAGRY100006902
- AAAGRY100006838
- AAAGRY100077176
- AAALAV100077176
- AAAGRY100076173
- AAABLU100076173
- AAALAV100076173
Compliance: This equipment complies with FCC Rules Part 15. Operation is subject to two conditions: this device may not cause harmful interference, and it must accept any interference received.
Need help? Contact Onn. support every day from 7 a.m. - 9 p.m. CST at 1-888-516-2630.
Technical requirements:
- Paper size: 80*80mm, 80g double-sided printing, environmentally friendly.
- Dimensions and tolerances not specified should follow the drawing and tolerance table.
Certifications: ROHS, HF, REACH, CA65 compliant.
