Onn. Medium Rugged Speaker

Quick Start Guide

What's in the Box?

Onn. Bluetooth Speaker
Strap
Charging Cable
Quick Start Guide

Get to Know Small Rugged Speaker

Key Features:

Volume -
Power button
Bluetooth button
Volume +
Broadcast button
Play / Pause button
Light button
AUX port
Charging port

Power on/off & Bluetooth Pairing

Power On/Off: Press the power button for 2 seconds to turn the speaker on or off.

Bluetooth Pairing: Short press the Bluetooth button to activate the Bluetooth device. Use your phone to search for the pairing name "onn. Rugged Speaker M" and click the pairing name for connection.

Voice Assistant: Double-press the power button to start the voice assistant.

Play Music

Short press the Play/Pause button to play or pause music.
Short press Volume + to increase volume. Long press Volume + for the next song.
Short press Volume - to decrease volume. Long press Volume - for the previous song.

Answer/End/Reject a Call

Short press the Play/Pause button to answer an incoming call.
Short press the Play/Pause button to end the call.
Long press the Play/Pause button for 3 seconds to reject a call.

Pairing Two Speakers Together (TWS)

1. Power on two speakers simultaneously. Wait for the prompt tone "Searching for connection" from both speakers.

2. Choose one speaker as the primary and long press the "oo" button for 3 seconds to enter TWS pairing mode. You will hear "left channel, right channel," indicating the speakers are paired.

3. Use your mobile device to pair with the primary speaker via Bluetooth pairing. You can now play audio in unison.

4. Press the "oo" button twice to disconnect the TWS pairing.

Clear Pairing Records and Reset Speaker

Press and hold the power and Bluetooth buttons for 3 seconds to clear all pairing records and restore default volume.
Press and hold the power button for 10 seconds to reset the speaker.

Charging and Connect Outside Audio

Charging: To preserve battery lifespan, fully charge the speaker at least once every 45 days. It takes approximately four hours for a full charge.

Charging Indicator: The LED is red while charging and turns off when fully charged.

Connect Outside Audio: Use the AUX port to connect external audio devices.

FCC Compliance Information

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Party Sync Mode Compatible Models

AAGRY100081916
AALAV100081916

Technical Requirements

Material: 80g coated paper, 1C printing, Walmart general, BM2020, environmentally friendly.
Dimensions: 80mm x 80mm.
Refer to the drawing and tolerance table for dimensions and tolerances not specified.
Compliance: ROHS, HF, REACH, CA65.
Dimensional Tolerance: +/-1mm.

	Onn. Rugged Speaker Quick Start Guide: Setup, Pairing, and Features This guide provides instructions for the Onn. Rugged Speaker, detailing its features, setup, Bluetooth pairing, TWS stereo mode, call handling, and charging. It also includes important FCC compliance information and manufacturer details.
	onn. Small Rugged Speaker Quick Start Guide Learn how to set up, pair, and use your onn. Small Rugged Speaker with this quick start guide. Includes instructions for Bluetooth pairing, TWS mode, call handling, charging, and important FCC compliance information.
	Onn. Small Rugged Speaker Quick Start Guide Quick start guide for the Onn. Small Rugged Speaker (Model BM2271), covering unboxing, setup, Bluetooth pairing, music playback, call handling, TWS connection, reset procedures, and charging.
	ONN. Small Rugged Speaker RF Exposure Evaluation Report RF Exposure Evaluation Report for the ONN. Small Rugged Speaker (Model: AAGRY100081918 and variants), conducted by Shenzhen Huaxia Testing Technology Co., Ltd. The report confirms compliance with FCC standards.
	Onn. MED LED Speaker Quick Start Guide A quick start guide for the Onn. MED LED Speaker, detailing setup, features, and troubleshooting.
	Onn. Rugged Mini-Speaker 100123973 Quick Start Guide Quick start guide for the Onn. Rugged Mini-Speaker (Model 100123973), detailing setup, features like Party Sync Mode, AUX, FM radio, hands-free calling, and technical specifications.
	Onn. Rugged Speaker Quick Start Guide - Model AAAGRY100006896 Concise guide to setting up and using your Onn. Rugged Speaker (Model AAAGRY100006896), covering box contents, speaker functions, Bluetooth and Aux connections, call handling, Party Sync Mode, and FCC information.
	Onn. LED Speaker Quick Start Guide A quick start guide for the Onn. LED Speaker, covering what's in the box, how to use the speaker, Bluetooth pairing, answering calls, light modes, and charging.