onn. Rugged Speaker Quick Start Guide
What's in the Box?
Check to make sure you have everything below:
- 1. Bluetooth Speaker
- 2. Strap
- 3. Quick Start Guide
- 4. Charging Cable
Get to Know Your Rugged Speaker
Top Controls
- 1. Power switch [power-icon]
- 2. Volume down/Previous track [volume-down-icon]
- 3. Light theme [light-theme-icon]
- 4. Play/Pause/Mute [play-pause-icon]
- 5. Bluetooth [bluetooth-icon]
- 6. Volume up/Next track [volume-up-icon]
- 7. Aux in [aux-in-icon]
Back Ports
- 8. Output charging port [output-charging-port]
- 9. Input charging port [input-charging-port]
Power
Long press the power switch [power-icon] for more than 2 seconds (>2s
) to power the speaker on or off.
Illustration showing a finger pressing the power button with text '> 2s ON/OFF'.
Bluetooth® Connection
Activate the Bluetooth function on your device and search for Bluetooth devices. Select "onn. Rugged LG GRY
" to start connecting.
Illustration showing a hand holding a smartphone displaying a Bluetooth connection prompt for 'onn. Rugged LG GRY'.
Aux Connection
Use a 3.5mm audio cable (not included) to connect the speaker to another audio source. Press Play on your audio device and adjust the volume on the speaker to obtain the desired volume.
Illustration showing a 3.5mm audio cable (labeled 'not included') connecting to the speaker's Aux In port.
Answer Calls
Short press the Play/Pause/Mute button [play-pause-icon] (<1s
) to answer an incoming call. Long press the same button for more than 3 seconds (>3s
) to reject the call.
Diagram showing call icons with text '< 1s' for answering and '> 3s' for rejecting.
Party Sync Mode
To enable Party Sync Mode, power on one speaker and then long press the Bluetooth button [bluetooth-icon] for 3 seconds. This speaker will become the master. A second compatible onn. speaker will connect automatically to the master when turned on.
After two speakers are paired, use your mobile device to pair with the master speaker using the standard Bluetooth pairing method.
Illustration showing two speakers connected wirelessly, with a mobile device icon and 'TWS' (True Wireless Stereo) label.
Product Information
Model Number: AAAGRY100006896
We'd love to hear from you. Scan with your Walmart app and let us know what you think.
Barcode with the number 6 81131 30995 0.
The Fine Print
USER MANUAL INSERTS FOR FCC ID
1. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
2. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
3. RF Exposure:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
4. Rating Label:
The rating label is located at the bottom of the product.