LIVARNO home Toilet Seat

Introduction

Congratulations on purchasing this high-quality LIVARNO home toilet seat. Please read these instructions carefully before first use and keep them for future reference. This product is not a toy and must be kept out of the reach of children.

Intended Use

This toilet seat is designed for mounting on standard toilets and is suitable for indoor installation only. The maximum permitted user weight is 150 kg.

Safety Instructions

⚠️ WARNING! Risk of Swallowing and Suffocation!

• Keep children away from packaging and small parts during unpacking and assembly, as they can be swallowed and cause suffocation.
• Do not allow children to play with the packaging film.
• Only adults should unpack and assemble the product.
• Remove all original packaging immediately.

⚠️ CAUTION! Risk of Injury!

• For your own safety, do not stand on the toilet seat, as it may break apart.
• Do not exceed the maximum user weight of 150 kg, as this may result in injury or product damage.
• Do not drop the toilet seat during assembly, as it could be damaged.

ATTENTION! For Domestic Use Only!

This toilet seat is intended solely for private household use and is not suitable for commercial purposes. Use the toilet seat only as described in this manual. Any other use is considered improper and may lead to property damage or personal injury. The manufacturer or dealer is not liable for damage caused by improper or incorrect use.

Assembly

Tools Required ?️

• Phillips head screwdriver (PH3)

Parts Included

• Screws (Part 1): 2x
• Washers (Part 2): 2x
• Decorative Caps (Part 3): 2x
• Mounting Brackets (Part 4): 2x

Installation Steps

1. Step A: Attach the mounting brackets (Part 4) to the toilet bowl using screws (Part 1) and washers (Part 2). Repeat for the second bracket.
2. Step B: Place the toilet seat onto the mounted brackets (Part 4) and secure with screws.
3. Step C: Adjust the position of the toilet seat on the toilet bowl.
4. Step D: Tighten the hinge screws using the Phillips head screwdriver (PH3). Ensure a torque of 5 Nm.
5. Step E: Attach the decorative caps (Part 3) to cover the hinge screws.
6. Step F: Ensure the toilet seat is securely attached.

ℹ️ Note: The toilet seat can open to a maximum angle of 110°.

Cleaning and Care

Clean the toilet seat with a damp cloth and a commercially available bathroom cleaner. Do not use harsh abrasive cleaners. Periodically check the position and tightness of the hinges and readjust if necessary.

Disposal

Dispose of the item in accordance with local regulatory requirements. Dispose of all packaging materials in an environmentally friendly manner.

Guarantee

This product comes with a 3-year guarantee from the date of purchase. Please keep your original receipt as proof of purchase. If a material or manufacturing defect occurs within three years, the product will be repaired or replaced free of charge, or the purchase price refunded, at the manufacturer's discretion. The defective device and receipt must be presented, along with a brief written description of the defect and when it occurred.

Service

For any defects, please contact customer service:

Qsource GmbH
Tel.: +49 40 87932653
Email: service@qsource.de
Available Monday to Friday, 8 a.m. to 4 p.m.