LIVARNO home Extendable Bathroom Caddy

Introduction

Congratulations on the purchase of your new LIVARNO home Extendable Bathroom Caddy. This high-quality product is designed for efficient bathroom storage. Before first use, please familiarize yourself with the product by carefully reading the following operating instructions and safety advice. Use the product only as instructed and for its intended application. Keep these instructions in a safe place. If you pass the product on to another person, ensure all documentation is included.

Intended Use

This product is intended for use solely as a storage rack. Any use other than that described above, or any modification to the product, is prohibited and may lead to personal injury and/or product damage. The manufacturer is not liable for any damages caused by use other than the intended purpose. This product is not intended for commercial use.

Technical Data

Max. load: Each basket 3 kg

Parts Description

• [A] 1 Top cap
• [B] 1 Extensible & lockable pole
• [C] 3 Basket with hanging hook
• [D] 1 Bottom cap
• [E] 3 Ring
• [F] 2 Long pole
• [G] 1 Short pole

Assembly Instructions

Follow these steps to assemble your Extendable Bathroom Caddy:

1. Assemble Pole Sections: Combine the extensible pole [B] with one or more pole extensions ([F] or [G]) to achieve the desired height. Insert the shorter pole section into the longer one and secure. (See Diagram 1 for joining pole sections).
2. Attach Bottom Cap: Slide the bottom cap [D] onto the bottom end of the assembled pole. (See Diagram 4).
3. Attach Baskets: Slide the rings [E] onto the pole at your desired heights. Hang the baskets [C] onto the rings [E] using their hooks. (See Diagrams 2, 3, 4).
4. Attach Top Cap: Place the top cap [A] onto the top end of the pole assembly. (Implied by parts list and Diagram 5).
5. Install Caddy: Extend the assembled pole between the floor and ceiling. Use the locking mechanism on the extensible pole [B] to secure the height. Ensure the product is stable and securely installed before use. (See Diagrams 6 and 7).
6. Loading: Each basket [C] has a maximum load capacity of 3 kg. Ensure the product remains stable after loading. (See Diagram 8).
7. Height Configurations: Diagram 9 illustrates various possible height configurations for the assembled caddy using the pole extensions.

Installation

Refer to Assembly Instructions (Diagrams 1 to 9). Note: Before filling the baskets, check that the product is well assembled and stable.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.

Warranty

This product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects, you have legal rights against the retailer of this product. Your legal rights are not limited by the warranty detailed below.

The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location as proof of purchase.

Should this product show any fault in materials or manufacture within 3 years from the date of purchase, LIVARNO home will, at its choice, repair or replace the product free of charge. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. It does not cover product parts subject to normal wear (e.g., batteries) or damage to fragile parts, such as switches, rechargeable batteries, or glass components.

Warranty Claim Procedure

To ensure quick processing of your case, please observe the following instructions:

Keep the sales receipt and the item number (IAN 426129_2301) available as proof of purchase for all inquiries. The item number can be found on the rating plate, an engraving on the title page of the instructions (bottom left), or as a sticker on the rear or bottom of the product.

If functional or other defects occur, please contact the service department listed below by telephone or e-mail. You can then send a defective product postage-free to the provided service address, enclosing the proof of purchase (sales receipt) and a written description of the defect and when it occurred.

Service

Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk

Service Ireland
Tel.: 1800 200736
E-Mail: owim@lidl.ie

Service Northern Ireland
Tel.: 0800 0927852
E-Mail: owim@lidl.ie