LIVARNO home

Introduction

This document is a shorter printed version of the complete instruction manual. Scan the QR code (www.lidl-service.com) to access the full manual online by entering the article number (IAN) 452963_2310.

This short guide is an integral part of the product. Familiarize yourself with all operation and safety notes before use. Store this guide safely and pass it on with the product if transferred to third parties.

Intended Use

Toilet seat designed for installation on almost all standard toilet bowls.

Description of Parts

• 1: 2 Stainless steel covers
• 2: 2 Non-slip gaskets
• 3: 2 Stainless steel screws
• 4: 2 Hinge bases
• 5: 2 T-type gaskets
• 6: 2 Square nuts

Installation

Refer to figures A to D for assembly.

Assembly Overview

You will need: A person ?, a screwdriver ?.

Parts Required for Assembly:

• 2 x Stainless steel covers (1)
• 2 x Non-slip gaskets (2)
• 2 x Stainless steel screws (3)
• 2 x Hinge bases (4)
• 2 x T-type gaskets (5)
• 2 x Square nuts (6)

Step-by-step Assembly Description:

Figure A: Illustrates the necessary tools and parts for assembly. The parts include: 1x Toilet Seat, 2x Non-slip gaskets, 2x Stainless steel screws, 2x Hinge bases, 2x T-type gaskets, and 2x Square nuts. The diagram shows how to attach the hinge bases (4) to the toilet seat, securing them with screws (3) and square nuts (6), with T-type gaskets (5) and non-slip gaskets (2) in place.

Figure B: Emphasizes the importance of visual inspection during installation. Before tightening the screws, ensure the toilet seat and lid are correctly aligned. Arrows indicate the required adjustments for proper positioning.

Figure C: Details the mounting process onto the toilet bowl. The hinge bases (4) are positioned, and screws (3) are inserted and tightened with a screwdriver. A torque of 5 Nm is recommended for secure attachment. The diagram shows the correct orientation.

Figure D: Shows the final step of placing the assembled toilet seat onto the toilet bowl's mounting points.

Safety Instructions

ATTENTION! THIS PRODUCT IS NOT A TOY! KEEP OUT OF REACH OF CHILDREN.

IMPORTANT

• The assembly must be carried out exactly according to this instruction. An incorrectly assembled product can pose a safety risk.
• Before assembly, check that the packaging contains all the components.
• Do not drop the toilet seat during assembly, as this could damage it.
• For your own safety, do not stand on the toilet seat, as this could break it.
• Do not push down the seat ring or lid. This will damage the slow-down function.
• Make sure that children do not support themselves on the lid.
• Do not exceed the maximum permitted load (150 kg) on the toilet seat. Failure to observe this advice may result in injury and/or damage to the product. (⚖️ 150 kg)

Cleaning and Care

To clean the toilet seat, use a damp cloth with a household bath cleaner. Do not apply harsh scouring agents.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

Service

Joniq GmbH

Tel.: 00 49 21159835149

E-Mail: info@joniq.eu

Model No.: U0005010/U0011020/U0011030

Article Number (IAN): 452963_2310