PREMISE ES2-RC1SC30B-3 Self Powered Combination LED Running Man
Product Usage Instructions
Installation
The ES2-RC1SC30B-3 Self-Powered Combination Running Man can be installed using the following methods: Ceiling Mount, Wall Mount, or Flag Mount. Refer to the mounting diagram for detailed instructions.
Operation
Ensure the battery is fully charged before use. The external LED status indicator and test switch can be used to check the battery status. In case of emergency or power outage, the running man sign will illuminate automatically.
Maintenance
Regularly inspect the unit for any damage or signs of wear. Clean the lens and housing with a soft, dry cloth. Do not use abrasive cleaners that may damage the surface.Frequently Asked Questions (FAQ):
Q: How long does it take to charge the battery?
A: The battery charge time is 24 hours.
ES2-SERIES
SELF-POWERED COMBINATION LED RUNNING MAN (STEEL HOUSING)
| Project | |
| Date | |
| Prepared by | |
| Model # | ES2-RC1SC30B-3 |
OVERVIEW
The ES2-RC1SC30B-3 Self-Powered Combination Running Man is constructed from a durable, steel housing. It comes standard with a mounting canopy, three pictograms, one backplate and all mounting hardware. An external LED status indicator and test switch is standard.
PRODUCT HIGHLIGHTS
- Universal AC input voltage from 120-347VAC, with back-up battery
- 30W Battery Power, able to support 6W of remote LED heads for more than 120 min
- Constructed of durable 20 gauge steel
- 90o x 90o swivel LED emergency lighting heads
- Powered by bright LEDs, with each head delivering more than 3 foot candle at an 8 foot distance
- Running Man sign emits even light output with high uniformity
- 9.84 cd/m2 high light output
- CSA listed for Canada & the US
ELECTRICAL SPECIFICATIONS
| ELECTRICAL SPECIFICATIONS | |||
| Input Voltage | 120-347 VAC 50/60Hz | Battery Type | Lead-Acid |
| System Power | 6W | Battery Charge Time | 24 hours |
| Indicator | Charge, Discharge, Test | Battery Discharge Time
(CSA Req’t: >2 hrs) |
>2 hours |
| Battery Capacity | 6V 5Ah (30W) | ||
| LIGHTING INFORMATION | |||
| Lamp Type | LED | LED Heads Lumen Output | 2 x 130 lm (260 lm) |
| Lens Material | PVC | Running Man Sign Luminance | 9.84 cd/m² |
| Lamp Power | 2 x 2W (LED Heads) + 2W (Sign) | Illuminating Surface Uniformity | 78% |
| EXTERNAL & MECHANICAL SPECIFICATIONS | |||
| Housing Material | Powder Coated Steel | Material Grade | UL-94v0 |
| Housing Color | White | Operation Temperature Range | 5oC to 30oC / 41oF to 86oF |
| Dimension (inch/mm) | 13.2” (W) x 12” (H) x 3.15” (D)
335mm (W) x 305mm (H) x 80mm (D) |
Installation Method | Ceiling Mount, Wall Mount, Flag Mount |
| Weight | 3.55 kg / 7.83 lbs | Warranty | 5 years |
| APPROVALS & LISTINGS | |||
|
Safety Compliance |
cCSAus |
Safety Standards |
CAN/CSA-C860-11 CSA C22.2 No. 141-15
CAN/CSA-C22.2 No. 250.13-14 |
| File Number | 272501 | Approved Locations | Damp Locations |
| RECOMMENDED CONFIGURATIONS | |||
PRODUCT DIMENSIONS
MOUNTING DIAGRAM 
POLAR CANDELA DISTRIBUTION (FOR 1 LED HEAD) 
ILLUMINANCE AT A DISTANCE (FOR 1 LED HEAD)
- Due to the special conditions of manufacturing, the typical data of optical specifications can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data.
- Exceeding maximum ratings for input voltage and current will cause hazardous overload and will likely destroy the LED fixture.
- Refer to Warranty Terms & Conditions available at premiseled.com/warranty
Specifications and dimensions
subject to change without notice.
80-86 CARRIER DRIVE
TORONTO, ON CANADA M9W 5R1
Documents / Resources
 |
PREMISE ES2-RC1SC30B-3 Self Powered Combination LED Running Man [pdf] Owner's Manual ES2-RC1SC30B-3 Self Powered Combination LED Running Man, ES2-RC1SC30B-3, Self Powered Combination LED Running Man, Combination LED Running Man, LED Running Man, Running Man |
