POWERTECH MP3743 MPPT Solar Charge Controller Instruction Manual

BOX CONTENTS:

1 x 12V/24V 30A MPPT Solar Charge Controller
1 x External Temperature Sensor
1 x User Guide
1 x App Guide

PRODUCT DIAGRAM:

1. LCD Screen
2. Green Indicator LED
3. Red indicator LED
4. External Temperature Probe
5. Solar Positive Input
6. Solar Negative Input
7. Battery Positive Input
8. Battery Negative Input
9. Load Positive Output
10. Load Negative Output
11. Up Button
12. Menu Button
13. Enter Button
14. USB Outputs
15. Down Button
16. Ethernet Socket

LCD SCREEN:

• A Solar Input Indicator
• B Solar Current Indicator
• C MPPT Charging Indicator
• D WiFi Indicator
• E Remote Control Indicator
• F Setting Mode Indicator
• G Load Switch Indicator
• H Battery capacity indicator
• I Load indicator
• J Display indicator for current reading
• K Battery type (12/24V)
• L Protection Icon ­ See error codes
• M Timing clock
• N Timing clock
• O Day/night indicator ­ set by PV input
• P Reading display with unit type

BASIC FUNCTIONS:

Settings Menu
If the display is off, tap the Menu button to turn it on. Press & hold the Menu button to enter the settings menu, and tap the Menu button again to cycle through each setting in the following order. Use the Enter button to enter / save a setting.

Factory Reset
With the unit turned off, press & hold the Menu button & power up the controller via the battery input. The screen will display FFFF to indicate all settings have been factory reset.

FAULT CODES:

SPECIFICATIONS:

NOTES:

Distributed by: Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere NSW 2116 Australia
www.electusdistribution.com.au
Made in China

Documents / Resources

POWERTECH MP3743 MPPT Solar Charge Controller [pdf] Instruction Manual MP3743, MPPT Solar Charge Controller, Solar Charge Controller for Lithium or SLA Batteries

References

• User Manual