Power Technologies CNC-10 Bay Charging and UV-C Sanitizing Cabinet
Specifications
| Model | CNC-10™ | |
|
Exterior Dimensions |
Inch | 19.8 (H) x 19 (W) x 13.75 (D) |
| cm | 50.29 (H) x 48.26 (W) x 34.93 (D) | |
|
Bay Dimensions |
Inch | 10 (H) x 14 (W) x 12.5 (D) |
| cm | 25.4 (H) x 35.56 (W) x 31.75 (D) | |
| Product Weight
(Without Devices) |
52 lbs (23.58 kg) | |
| Shipping Weight | 57 lbs (25.85 kg) | |
| Capacity | 10 Tablets – Configurable Interior | |
| Supported Devices | Max Device Size: 10″ x 12.5″ (25.4 cm x 31.75 cm) | |
| Power Specifications
(For cabinets sold within North America) |
AC IN/ Power Strip: 110V AC, 50/60Hz, 10A Maximum power: 1400W | |
| Power Specifications
(For cabinets sold outside North America) |
AC IN/ Power Strip: 110-240V AC, 50/60Hz, 10A
Maximum power: 2400W |
|
| Charging Type | USB-C Charging Hub | |
| Security | Lockable via Security Code | |
| Sanitizing Type | UV-C Light Sanitization | |
| Bulb Specification | 360° Reach – Lamps & Reflective Lining Virtually Eliminate Blind Spots, 254nm mecury based bulb | |
| Bulb Wattage | 8 Watts | |
| Bulb Life | Up to 6000 hours | |
| Adapter Shelves Loading (ea.) | 6.6 lbs (3 kg) | |
| Working Temperature | 0°- 30°c | |
| Working RH% | 10% – 90% | |
| Storage Temperature | -40°- 60°C Temp | |
| Storage RH% | 5% – 95% | |
| Warranty | Lifetime Frame, 2 Years Components, 2 Years Electronics | |
Product Usage Instructions
- Touchscreen Interface & Controls:
The CNC-10TM features a touchscreen interface for easy operation. Use the controls to set up the charging and sanitizing process. - Loading Devices:
Open the cabinet using the handle and load up to 10 devices onto the removable medical-grade stainless steel racks. - Power Connection:
Connect the power cord to the power port located on the rear of the cabinet. - Sanitizing & Charging Process:
Close the cabinet securely and initiate the sanitizing and charging process using the touchscreen interface. - Unloading Devices:
Once the process is complete, open the cabinet, remove the sanitized and charged devices, and close the cabinet for future use.
Designed to charge, securely store, and disinfect 10 devices up to 14 inches.
Product Information
This manual covers the following models and part numbers below. Refer to the part numbers and cord end diagrams for your specific region.
Note: The manual is based upon the North American 110V product offering.
MODEL# CNC-10™
| SKU | DESCRIPTION |
| CAB-CNC-B10K-D | CNC-10™, 10 Bay UV-C Sanitizing & Charging Cabinet – 110V NA |
| CAB-CNC-B10K-E | CNC-10™, 10 Bay UV-C Sanitizing & Charging Cabinet – 220V EU |
| CAB-CNC-B10K-U | CNC-10™, 10 Bay UV-C Sanitizing & Charging Cabinet – 220V UK |
| CAB-CNC-B10K-A | CNC-10™, 10 Bay UV-C Sanitizing & Charging Cabinet – 240V AU |
| CAB-CNC-B10K-S | CNC-10™, 10 Bay UV-C Sanitizing & Charging Cabinet – 220V SW |
Power Cords and Sockets for Specific Region:
The CNC-10™ is designed to disinfect and charge tablets and other electronic devices.
Note: Review this guide before installing devices and to learn how to safely use your cabinet.
PRODUCT OVERVIEW
Internal Configurations:
CNC-10™ comes with two additional racks in addition to the divider base and top rack allowing charging space to be configured to meet device needs.
User Instructions
Operation and User Interface:
- To use the CNC-10™, simply unlock the cabinet door, place the device inside, and connect it to the pre-loaded charging cable.
- CNC-10™ will charge the device based upon device’s settings. Once charged CNC-10™ provides a maintenance charge keeping devices ready for use.
Unlock and Lock Cabinet Door:
This is done via the control panel. Cabinet is equipped with an electro-magnetic lock that engages while the unit is powered. A mechanical lock release is found in secured side panel for access by administrator.
How-To Lock Cabinet
- Hit “Lock” icon on control panel.
- Prompt will appear saying the following: Lock the cabinet door?Hit “OK”
How-To Unlock Cabinet
- To unlock, select “Lock” icon again.
- Enter password and select “Unlock”.
- Icon on main screen will show lock as being open.
Changing User Password:
How-To Change Password
- Hit “Settings” icon on control panel.
- Select “Change Password” option.
- Enter current password. Hit “OK”
- Enter new password. Hit “OK”
Default Passwords for User and Administrator
- The factory default user password is 1234, and the user password can be used to unlock and reset the UV lamp usage time;
- The user password can be modified as well,
- The modification method is as follows: enter the old user password or administrator password in the password change page–click OK, enter the new user password–click OK.
- The administrator password is fixed to 5482045, and the administrator password can only be used to modify user passwords.
- If a user forgets his/her password, the administrator can set a new user password with the administrator password.
Installation Instructions
Setting Up USB-C Cables: Group cables together to guide cables through easily.
- Plug into the USB-C Hub
Connect one end of each cable to the appropriate port on the USB-C Hub. - Thread through the Pass-Through
- Carefully guide the bundled cables through the pass-through opening.
- Tip: If you encounter resistance while feeding the cables, try gently flexing the cables or adjusting the angle of entry.
- Secure with the Bracket
Position the cables so they are held securely by the retaining bracket. The zip ties will add extra tension, ensuring a firm hold.
Fitting Devices Inside Cabinet
Setting Up Devices:
- Open the door and place devices inside so that all surfaces are completely exposed.
- To configure racks differently, remove thumb screws from the left/right sides and pull the shelf out. Insert new shelf and replace thumb screws.
- Place devices in again so that all surfaces are completely exposed. If needed, place less items inside to avoid crowding.
- Begin the Disinfection process.
Care and Maintenace:
- Keep the cabinet exterior clean with a mild cleaner on a soft cloth for exterior surfaces.
- Interior service should be cleaned via compressed air once a month or as needed.
- Medical Grade Stainless Steel racks should be wiped down with mild cleaner once a month or as needed.
Disinfecting Of Devices
Overview:
- Support infection control initiatives with ultraviolet (UV-C) light sanitization to encourage more frequent disinfection without the use of corrosive chemicals. CNC-10™ effectively kills 99.9%
of infectious pathogens for various devices. The UV absorbing, transparent window with electro-magnetic locking system keeps users safe while devices are being disinfected. Disinfection cycle times, from 3 minutes to 20 minutes, can be customized depending on workflow and efficacy needs. - CNC-10™ customizable charging for up to 10 electronic devices. Designed with the highest level of flexibility and versatility in mind, CNC-10™ offers the ability to configure medical grade stainless steel racks to adapt to devices of varying shapes and sizes.
- Integrated cable management and lockable power adapter storage area keep cables organized and secure.
Disinfect:
- Medical Grade Stainless Steel Racks.
- Chemical-free UV-surface disinfection process.
- Sanitizes Exposed Surfaces.
- Locker Power Adapter Storage Area with Removable Top Panel.
- Effectively kill 99.9% of infectious pathogens like influenza, the common cold and coronavirus.
- 360° reach – eight lamps and reflective lining Virtually Eliminate Blind Spots.
- Customizable disinfection cycle times.
- Integrated Cable Management.
Determining Time
The following list is provided as a guide of which organisms become deactivated within 3 minutes:
- Bacteria
- Bacillus anthracis
- B. megatherium sp. (spores)
- B. megatherium sp. (veg.)
- B. parathyphosus
- B.suptilis
- B. suptilis spores
- Campylobacter jerjuni
- Clostridium tetani
- Corynebacterium diphteriae
- Dysentery bacilli
- Eberthella typhosa
- Escherichia coli
- Klebsiella terrifani
- Legionella pneumophila
- Micrococcus candidus
- Micrococcus sphaeroides
- Mycobacterium tuberculosis
- Neisseria catarrhalis
- Phytomonas tumefaciens
- Pseudomonas aeruginosa
- Pseudomonas fluorescens
- Proteus vulgaris
- Salmonella enteritidis
- Salmonella paratyphi
- Salmonella typhimurium
- Sarcina lutea
- Seratia marcescens
- Shigella paradysenteriae
- Shigella sonnei
- Spirillum rubrum
- Staphylococcus albus
- Staphylococcus aureus
- Streptococcus faecalis
- Streptococcus hemoluticus
- Streptococcus lactus
- Streptococcus viridans
- Sentertidis
- Vibrio chlolerae (V.comma)
- Yersinia enterocolitica
- Yeasts
- Bakers’ yeast
- Brewers’ yeast
- Common yeast cake
- Saccharomyces cerevisiae
- Saccharomyces ellipsoideus
- Saccharomyces sp.
- Mould Spores
- Aspergillus flavus
- Aspergillus glaucus
- Aspergillus niger
- Mucor racemosus A
- Mucor racemosus B
- Oospora lactis
- Penicillium digitatum
- Penicillium expansum
- Penicillium roqueforti
- Rhizopus nigricans
- Viruses
- Hepatitis A
- Influenza virus
- MS-2 Coliphase
- Polio virus
- Rotavirus
Additional time settings may be needed for other organisms not listed.
Bulb Life & Replacement
CAUTION: UV Lamps contain mercury – manage in accordance with your local disposal laws. A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
For maximum efficiency, change bulbs when one no longer works or more than 6,000 hours.
- With your unit unplugged from an electrical outlet, open the door. Remove the thumbscrews from the left side and pull the upper, middle & lower shelves out.
- Wearing cotton gloves, rotate the old bulb counter clockwise to release it from the lamp socket. Install new bulb by placing into lamp socket and rotating clockwise until you hear a click.
- Plug the unit back into an electrical outlet and reset the Bulb Use Hours counter by following the instructions below.
How-To Reset Bulb Usage
- Hit “Settings” icon on control panel.
- Select “Reset Bulb Usage” option.
- Enter current password. Hit “Reset”
NOTE: Cabinet door will not unlock during UV-C disinfection. Press stop to end UV-C disinfection to activate the lock button.
Safety Instructions
THIS IS NOT A TOY. ALWAYS FOLLOW SAFETY INSTRUCTIONS.
Caution
- DO NOT place liquids on or near the cabinet.
- DO NOT block fan or vent opening
- Ultraviolet light. Avoid eye and skin
Important
THE ELECTRICAL SYSTEM IS DESIGNED TO HANDLE A MAXIMUM OF 1400 WATTS per side. If wattage exceeds 1400W at one time, charging system may not operate correctly. Remove devices until the total wattage is under 1400W.
- ALWAYS move the cabinet slowly and be aware of our surroundings.
- Used or broken bulbs should be disposed of in accordance with all applicable disposal laws.
- Repairs should always be performed by a qualified electrician.
- Set the power switch to the OFF position before you unplug the unit from the wall, plug the unit into the wall, or plug in devices.
- Do not touch bulbs or ballasts.
- Do not alter the construction or design. Do not remove safety labels or devices.
- Do not use this product around flammable or combustible materials.
Danger
- Don’t connect the cart with broken electrical components.
- DO NOT touch any part of the electrical system while plugged in.
Notice
- DO NOT allow children to move or climb.
- DO NOT overextend the power cord
This UV-C product is not approved and/or certified as a medical device.
For warranty claims, please have the following information ready, then visit www.powertechnologies.com to create a help ticket.
- Serial Number:
- Charging System Type:
- Date Of Purchase:
- Reseller Name:
- PO Number:
Further InformationFurther Information
For further information on this product and others, contact Power Technologies at.
- Power Technologies 42035 Zevo Dr Temecula, CA 92590
- 888.650.4488
- support@powertechnologies.com
- www.powertechnologies.com
42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com
FAQ
Q: Can I use the CNC-10TM to charge smartphones?
A: The CNC-10TM is designed for tablets and other electronic devices with dimensions up to 10 x 12.5 inches (25.4 cm x 31.75 cm). It may not be suitable for smartphones.
Q: How often should I replace the UV-C bulb?
A: The UV-C bulb has a lifespan of up to 6000 hours. It is recommended to replace the bulb after reaching this limit for optimal sanitization performance.
Documents / Resources
 |
Power Technologies CNC-10 Bay Charging and UV-C Sanitizing Cabinet [pdf] User Manual CNC-10 Bay Charging and UV-C Sanitizing Cabinet, Bay Charging and UV-C Sanitizing Cabinet, Charging and UV-C Sanitizing Cabinet, UV-C Sanitizing Cabinet, Sanitizing Cabinet, Cabinet |