Polybird P16-R 38 Square Dining Table
TOOLS
- Hex Key
- Screwdriver (not provided)
- Wrench
HARDWARE
- x8 1/4” x 21/4” Wafer Bolt
- x8 #8 x 2 1/2” screws
- x8 1/4” Flange nut
PARTS
ASSEMBLY INSTRUCTIONS
Attach braces D & E to legs B using two 21/2” screws (BB) per leg.
Repeat step 1 on the other side using legs C.
Repeat on the other side
Attach table top A to table assembly from step 2. Use two 1/4” x 21/4” wafer bolts (AA) at each leg and finish on the inside with eight flange nuts (CC).
Documents / Resources
 |
Polybird P16-R 38 Square Dining Table [pdf] Instruction Manual P16-R 38 Square Dining Table, 38 Square Dining Table, Dining Table, Table |
