Polybird P15-C 38 Round Dining Table
INSTRUCTION MANUAL
Model: P15-C
TOOLS & HARDWARE
PARTS
ASSEMBLE
1. Attach cross pieces D & E to legs B using two 2 1/2” screws (BB) per cross piece.
2. Repeat step 1 for cross pieces F & G.
3. Insert cross pieces D, E, F & G in pockets on leg C and attach with two 2 1/2” screws (BB) per cross piece.
4. Attach table top A to table assembly from step 3. Use two 1/4” x 21/4” wafer bolts (AA) at each leg and finish with eight flange nuts (CC).
Specifications
- Product: 38 Round Table P15-C
- Tools Required (not provided): Hex Key, Screwdriver,
Wrench - Hardware Included:
- AA x8 1/4 x 2 1/4 Wafer Bolt
- BB x16 #8 x 2 1/2 screws
- CC x8 1/4 Flange nut
FAQ (Frequently Asked Questions)
Q: Are the tools required for assembly included in the package?
A: No, the hex key, screwdriver, and wrench are not provided.
Please ensure you have these tools before starting the assembly process.
Q: Can the table be disassembled for storage or transport?
A: Yes, you can disassemble the table by following the assembly steps in reverse order. Keep track of the hardware for reassembly.
Q: What is the recommended weight capacity for this table?
A: The recommended weight capacity for this table is [insert weight capacity if available]. Exceeding this limit may cause damage to the product.
Documents / Resources
 |
Polybird P15-C 38 Round Dining Table [pdf] Instruction Manual P15-C 38 Round Dining Table, 38 Round Dining Table, Round Dining Table, Dining Table, Table |
