Plexgear Wireless keyboard User Manual
KW-800
Specifications
- Receiver: USB
- Frequency: 2.4 GHz
- Range: up to 8 m
- OS: Windows XP/7/8/10, Mac OS
- Size: 440.1×127.7×16.7 mm
- Batteries: 2x AAA (not included)
Included
- Keyboard
- USB receiver
- Manual
Batteries
Insert 2 AAA batteries in the hatch on the back of the keyboard. Remove the USB receiver while you’re at it and put the hatch back.
On/off
The keyboard automatically turns on when keys are pressed. The keyboard automatically goes to sleep after it has been inactive long enough.
Installation
- Turn on the keyboard.
- Connect the USB receiver to the computer. Avoid using a USB hub.
- Press the Esc and Q keys at the same time within 15 seconds of connecting the receiver.
LED
The LED flashes during the pairing process and if the battery status is low.
Hotkeys
- FN + F1 = Media
- FN + F2 = Volume Down
- FN + F3 = Volume Up
- FN + F4 = Mute (Windows)
- FN + F5 = Previous Track
- FN + F6 = Next Track
- FN + F7 = Play/Pause
- FN + F8 = Stop
- FN + F9 = Web/home
- FN + F10 = Email
- FN + F11 = My computer
- FN + F12 = Favorite
- FN + Cogwheel = Windows 10 setting
- FN + Lock = Lock computer (Win + L)
- Calculator = Calculator
- Magnifying glass = Search
- Third numpad key from left = Wireless audio/audio sharing
Documents / Resources
 | Wireless keyboard |
References
- User Manualmanual.tools
Published: August 9, 2021
*Plexgear C-500*
How do i turn off this keyboard?
Why arent there an On/Off-button?
Best regards
How do i turn off this keyboard?
Why arent there an On/Off-button?
Best regards
How do I turn off the Plexgear C-500 keyboard and why is there no power button?
The Plexgear wireless keyboard does not have a physical On/Off button because it is designed with an automatic power management system. According to the manual:
Because of this design, there is no need to manually turn the device off. If you wish to completely cut power for long-term storage, you would need to remove the 2x AAA batteries from the compartment on the back.
Read the full Q&A page