Hello, this is Home Assistant Green

For more information getting started, visit green.home-assistant.io

Thanks for supporting the Home Assistant project!

Getting Started

1. Connect the Ethernet cable from Home Assistant Green to your local home network router or switch.

   [Diagram showing Ethernet cable connection to the device]

2. Plug the power supply cable into Home Assistant Green and connect it to a power outlet.

   [Diagram showing power supply connection to the device]

3. Wait for a few minutes until the yellow light starts blinking regularly.

   [Diagram showing the device with a blinking yellow light]

4. Download the Home Assistant app on your tablet or phone, or open http://homeassistant.local:8123 in your browser.

   

   [QR code linking to App Store]

   [QR code linking to Google Play Store]

   Google Play and the Google Play logo are trademarks of Google LLC.

Device Overview

Front

• White light: Power indicator
• Yellow light: System health indicator
• Green light: Activity indicator

Back

• HDMI port: For diagnostic purposes only
• Power off button: Press and hold for 6 seconds to shut down safely, or 12 seconds to force power off.
• Power supply port: 12 V DC =, 1A
• USB 2.0 ports ×2: For use with Home Assistant SkyConnect and more
• MicroSD slot: For recovery purposes only
• Gigabit Ethernet port: Connect to your network