Home Assistant Green Quick Start Guide
Welcome to your Home Assistant Green smart home hub.
Getting Started
Step 1: Connect to Network
Connect the Ethernet cable from your Home Assistant Green device to your local network router or switch.
[Diagram: Ethernet cable being plugged into the Gigabit Ethernet port on the back of the device.]
Step 2: Connect Power
Plug the power supply cable (12V DC, 1A) into the Home Assistant Green device and connect it to a power outlet.
[Diagram: Power supply cable being plugged into the Power supply port on the back of the device.]
Step 3: Wait for Boot
Wait a few minutes for the device to boot up. The yellow indicator light should start blinking regularly, indicating the system is ready.
[Diagram: Home Assistant Green device with a yellow indicator light blinking.]
Step 4: Access Home Assistant
Download the Home Assistant app on your tablet or phone, or open http://homeassistant.local:8123 in your web browser.
For more information and to get started, visit green.home-assistant.io.
[App Store and Google Play links are available, but QR codes are excluded.]
Device Overview
Front Panel
- White light: Power indicator.
- Yellow light: System health indicator.
- Green light: Activity indicator.
Back Panel
Power supply port: 12V DC, 1A.
2x USB 2.0 ports: For use with Home Assistant SkyConnect and other accessories.
MicroSD slot: For recovery purposes only.
Gigabit Ethernet port: For network connection.
HDMI port: For diagnostic purposes only.
Power off button: Press and hold for 6 seconds to shut down safely, or 12 seconds to force power off.
Thank you for supporting the Home Assistant project!
