Timex Intelligent Quartz Tide Temp Compass Watch User Manual

Produkt ponadview

The Timex Intelligent Quartz Tide Temp Compass Watch is a sophisticated timepiece designed for outdoor enthusiasts and everyday wear. It features a unique combination of analog displays for time, tide, temperature, and compass functions, powered by Timex's Intelligent Quartz technology. This manual provides detailed instructions for setting up, operating, and maintaining your watch.

Rycina 1: Przód view of the Timex Intelligent Quartz Tide Temp Compass Watch.

Instalacja i konfiguracja początkowa

Before using your watch, it is important to perform the initial setup and calibration steps to ensure accurate readings for all functions.

1. Ustawienie czasu

To set the time, pull the crown out to the outermost position. Rotate the crown to adjust the hour and minute hands to the correct time. Push the crown back in to resume timekeeping.

2. Kalibracja kompasu

For accurate compass readings, the watch must be calibrated away from large metal objects and electronics. Follow these steps:

1. Place the watch on a level surface.
2. Wyciągnij koronkę do środkowej pozycji.
3. Once the indicator hand stops moving, press the left pusher.
4. Slowly rotate the watch for two complete revolutions. Each revolution should take at least 15 seconds.
5. Press either pusher once complete.

3. Setting Local Declination Angle

The declination angle is the difference between magnetic north and true north, which varies by location. To set your local declination angle:

1. With the crown still in the middle position (after compass calibration), press the top pusher to move the fourth hand west, or the bottom pusher to move the hand east.
2. Each short push adjusts the hand by one degree. Consult a local map or online resource for your area's specific declination angle.
3. Once set, return the crown to the original position.

Uwaga: dla example, in New York City, the declination angle is approximately 13 degrees west.

4. Tide and Temperature Calibration

Specific calibration steps for tide and temperature are typically detailed in the full user guide. Generally, tide tracking requires setting the current high or low tide for your location, and temperature readings are most accurate when the watch is off the wrist for a period to avoid body heat interference.

Instrukcja obsługi

Using the Tide Tracker

The tide tracker counts down to high or low tide. Once calibrated to your local tide cycle, the sub-dial will indicate the current tide status, helping you plan activities near coastal areas.

Korzystanie z termometru

The watch features a thermometer to measure air and water temperature. For accurate air temperature readings, remove the watch from your wrist and allow it to acclimate to the ambient temperature for at least 15-20 minutes.

Using the Analog Compass

After calibration and declination angle setting, the analog compass provides directional guidance. Hold the watch level and allow the compass hand to settle to determine your bearing.

Indiglo Lampka nocna

The Indiglo light-up watch dial illuminates the entire dial for easy readability in low-light conditions. Activate by pressing the crown.

Odporność na wodę

This watch is water-resistant to 100 meters (330 feet). It is suitable for snorkeling and swimming, but not for diving. Avoid operating the pushers or crown while the watch is submerged to prevent water ingress.

Konserwacja

Właściwa pielęgnacja zapewni długowieczność i wydajność zegarka Timex.

• Czyszczenie: Regularnie czyść zegarek miękką,amp cloth. For silicone straps, mild soap and water can be used. Ensure the watch is completely dry before wearing.
• Bateria: The watch requires 1 Lithium Metal battery (included). Battery life varies depending on usage of features like Indiglo. When the battery needs replacement, it is recommended to have it done by a qualified watch technician to ensure water resistance is maintained.
• Składowanie: Przechowuj zegarek w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
• Unikaj uderzeń: While durable, avoid dropping the watch or subjecting it to severe impacts, which can damage internal components.

Rozwiązywanie problemów

If you encounter issues with your watch, try the following common troubleshooting steps:

• Watch Not Functioning/Stopped: Check if the crown is fully pushed in. If the watch still does not operate, the battery may need replacement.
• Inaccurate Compass/Tide/Temperature: Re-perform the calibration steps detailed in the "Setup and Initial Configuration" section. Ensure you are away from magnetic interference when calibrating the compass.
• Kondensacja pod kryształem: Może to wskazywać na utratę wodoodporności. Unikaj dalszego kontaktu z wodą i natychmiast skontaktuj się z serwisem.
• Przyciski nie odpowiadają: Ensure the crown is in the correct position for the desired function. If issues persist, a professional inspection may be required.

For persistent issues not resolved by these steps, please contact Timex customer support.

Specyfikacje

Gwarancja i wsparcie

Zegarki Timex są produkowane zgodnie z najwyższymi standardami i objęte ograniczoną gwarancją. Szczegółowe informacje dotyczące gwarancji można znaleźć w karcie gwarancyjnej dołączonej do produktu lub na oficjalnej stronie Timex. webstrona.

For further assistance, technical support, or to download the complete user guide, please visit the official Timex support page or refer to the PDF user guide available online:

Pobierz pełną instrukcję obsługi (PDF)