PHILIPS UID8480 Zigbee Green Power Switch
Specifications
- Communication: Zigbee PRO Green Power IEEE 802.15.4 WPAN
- Wireless Data rate: 250 kbps
- Protection rating: IP20
- Carrier frequency: 2.4 GHz
- Dimensions (H x W x D): 81 x 81 x 14 mm (3.19 x 3.19 x 0.55 in)
- Weight: 0.058 kg (2.05 oz)
- Color: White (similar to RAL9000)
- Lifetime: > 50,000 actuation
- Temperature (operating): Suitable for 0% to 95% relative humidity (non-condensing)
- Temperature (storage and transport): Suitable for 0% to 95% relative humidity (non-condensing)
Product Usage Instructions
Features and Benefits
The UID8480 Zigbee Green Power switch allows for easy control of lighting scenes and dimming levels through short and long presses.
Applications
The switch can be configured via the app for various functionalities:
- Scene 1 recall: Short press for scene, long press to tune up toward CCT 6500 K.
- Scene 2 recall: Short press for scene, long press to tune down towards CCT 2700 K.
- ON state: Long press for dim up.
- OFF state: Long press for dim down.
FAQ
- Q: Can the switch be used outdoors?
- A: No, the switch has an IP20 protection rating and is suitable for indoor use only.
- Q: What is the wireless range of the switch?
- A: The transmission distance can vary but typically ranges up to 10m in indoor plasterboard settings and up to 7m in indoor reinforced concrete settings.
Product Information
- No wiring and power connections are required so easy to install.
- Low mechanical force is required to operate the device (typically less than 8 Newton).
- Indoor distance that can be covered is typically 10 m (33 ft)for line-of-sight installations. When there are walls this will be reduced depending on the type and thickness of the walls.
- Supports tunable white CCT control.
Features and Benefits
- Provides switch and scene selection functionality.
- Wireless communication based on the ZigBee Pro standard (IEEE 802.15.4, WPAN). This switch is a self-powered switch that operates using the kinetic energy generated through its button press action and electrical power supply is not required.
- When a button is pressed, or released, a message is sent including a unique 32-bit identifier that prevents interference with other devices.
- Briefly pressing the rocker either switches lights ON or OFF or selects a predefined scene.
- The device is interact-ready and can be easily linked to a wireless standalone or connected lighting system.
- The devices are easy to install and use. Additional information can be found in the appropriate installation instructions.
Applications
Dimensional drawing
Specifications
Communication
- Wireless Zigbee PRO Green Power
- IEEE 802.15.4 WPAN
- Data rate 250 kbps
- Carrier frequency 2.4 GHz
Transmission distances (typical values)*
- Indoor (plasterboard) 10 m (33 ft); max. 3 walls
- Indoor reinforced concrete 7 m (23 ft); max 1 wall/ceiling
Physical
- Dimensions (H x W x D)81 x 81 x 14 mm (3.19 x 3.19 x 0.55 in)
- Weight 0.058 kg (2.05 oz)
- Housing Polycarbonate
- Color White (similar to RAL9000)
- Lifetime> 50 000 actuation
Environment
- Temperature (operating) −25 to +65 °C (−13 to +149 °F)
- Relative humidity (operating) 0% to 95% (non-condensing)
- Temperature (storage and transport) −25 to +65 °C (−13 to +149 °F)
- Relative humidity (storage and transport) 0% to 95% (non-condensing)
Compliances and approvals
- Protection rating IP20
- Electromagnetic compatibility (EMC) EN 61000-6-2:2005 EN 61000-6-4:2007+A1:2011
- Quality standard ISO9001
- Environmental standard ISO14001, CE2522
- Restriction of Hazardous Substances (RoHS) 2011/65/EU Annex 2015/863/EU
Wireless
- EU Radio Equipment Directive RED 2014/53/EU
- Electronic compatibility and radio spectrum matters (ERM) EN 301489-1:V2.2.0 EN 301489-17:V3.2.0
- Wideband transmission systems ETSI EN 300 328: V1.8.1
Distance is largely influenced by the wall/ceiling material and the angle that the transmitted signal is intersecting with. Note: fire-safety walls, elevator shafts and so on are considered as shielding
Packing data
Ordering data
© 2020-2024 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners
Documents / Resources
 |
PHILIPS UID8480 Zigbee Green Power Switch [pdf] User Guide UID8480 Zigbee Green Power Switch, UID8480, Zigbee Green Power Switch, Green Power Switch, Power Switch, Switch |
 |
PHILIPS UID8480 Zigbee Green Power Switch [pdf] User Guide UID8480 Zigbee Green Power Switch, UID8480, Zigbee Green Power Switch, Green Power Switch, Power Switch, Switch |