User Guide for PHILIPS models including: UID8480 Zigbee Green Power Switch, UID8480, Zigbee Green Power Switch, Green Power Switch, Power Switch, Switch
File Info : application/pdf, 4 Pages, 375.46KB
DocumentDocumentWireless switch UID8480 Specification Sheet UID8480 Zigbee Green Power switch · No wiring and power connections required so easy to install. · Low mechanical force required to operate the device (typically less than 8 Newton). · Indoor distance that can be covered is typically 10 m (33 ft) for line-of-sight installations. When there are walls this will be reduced depending on the type and thickness of the walls. · Supports tunable white CCT control. 81 mm (3.19 in) UID8480 Features and benefits · Provides switch and scene selection functionality. · Wireless communication based on the ZigBee Pro standard (IEEE 802.15.4, WPAN). This switch is a self powered switch which operates using the kinetic energy generated through its button press action and electrical power supply is not required. · When a button is pressed, or released, a message is sent including a unique 32 bit identifier which prevents interferences with other devices. · Briefly pressing the rocker either switches lights ON or OFF or selects a predefined scene. · The device is Interact ready and can be easily linked to a wireless standalone or connected lighting system. · The devices are easy to install and use. Additional information can be found in the appropriate installation instructions. Dimensional drawing 14 mm (0.55 in) 81 mm (3.19 in) Applications Scene 1 recall Configurable via app Short press for scene Long press tune up, move towards CCT 6500 K Scene 2 recall Configurable via app Short press for scene Long press tune down, move towards CCT 2700 K ON state Dim up state long press OFF state Dim down state long press 2 Specification Sheet - UID8480 Zigbee Green Power switch Specifications Communication Compliances and approvals Wireless Data rate Zigbee PRO Green Power IEEE 802.15.4 WPAN 250 kbps Protection rating IP20 Electromagnetic compatibility EN 61000-6-2:2005 EN 61000- (EMC) 6-4:2007+A1:2011 Carrier frequency 2.4 GHz Quality standard ISO9001 Transmission distances (typical values)* Environmental standard ISO14001, CE2522 Indoor (plasterboard) Indoor reinforced concrete Physical Dimensions (H x W x D) Weight Housing 10 m (33 ft); max. 3 walls 7 m (23 ft); max 1 wall/ceiling 81 x 81 x 14 mm (3.19 x 3.19 x 0.55 in) 0.058 kg (2.05 oz) Polycarbonate Restriction of Hazardous Substances (RoHS) 2011/65/EU Annex 2015/863/EU Wireless EU Radio Equipment Directive RED 2014/53/EU Electronic compatibility and EN 301489-1:V2.2.0 EN radio spectrum matters (ERM) 301489-17:V3.2.0 Wideband transmission systems ETSI EN 300 328: V1.8.1 Color White (similar to RAL9000) Lifetime Environment > 50 000 actuations Temperature (operating) -25 to +65 °C (-13 to +149 °F) Relative humidity (operating) 0% to 95% (non-condensing) Temperature (storage and transport) -25 to +65 °C (-13 to +149 °F) Relative humidity (storage and transport) 0% to 95% (non-condensing) * Distance is largely influenced by the wall/ceiling material and the angle that the transmitted signal is intersecting with. Note: fire-safety walls, elevator shafts and so on are considered as shielding. Specification Sheet - UID8480 Zigbee Green Power switch 3 Packing data Type Dimensions Qty Material Single pack 205 x 95 x 95 mm 10 (80.7 x 37.4 x 37.4 in) Cardboard Weight net 0.58 kg (1.28 lb) gross 0.74 kg (1.63 lb) Ordering data Type UID8480/10 ZGP Switch Scene recall 4B MOQ Ordering number EAN1 EAN2 EOC 10 9137 010 55803 8719514 273801 8719514 273818 273801 00 © 2020-2024 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners. R04 29 August 2024 www.philips.com/lighting