EcoSet BLE IR Remote Controller
Instruction Manual
Remote control power supply: 2 AA batteries
Effective control distance of remote control:
Infrared within 10 m
Bluetooth within15 m
The environment
Storage temperature: -20ºC to 70ºC
Battery storage temperature: 5ºC to 30ºC
Operating temperature: -5ºC ~45ºC
Production description
| 12NC Desc | Description | Size(mm) |
| 9.11E+11 | Ecocert BLE IR Remote Controller | 174x46x22.6 |
Battery Installation method
- Remove the battery cover.
- Insert the batteries with the correct polarity.
- Install the battery cover back.
Battery Precautions
Attention
- Please read this manual carefully before using this product
- Keep the remote controller away from routers and other signal devices (Zigbee, Wi-Fi, etc. )
- Do not cover the wireless antenna on the remote controller with metal. (Dotted line below)
- Considering the impact of metal structure on wireless signal, ensure that the remote controller is far away from the surrounding metal pipeline and steel-reinforced concrete structure during the process of on-site use so as to minimize the negative impacts on the wireless signal. Otherwise, signal transmission distance would be affected.
- When clean the remote controller, neither put it into water nor wipe it with organic solvent (alcohol).
Signify Luminaires (Shanghai) Co. Ltd
Address: 2F, Building 1, No. 2555 Hechuan Road, Minhang
District, Shanghai
P.R. China
Postal code: 200233
Documents / Resources
 |
PHILIPS EcoSet BLE IR Remote Controller [pdf] Instruction Manual EcoSet BLE, IR Remote Controller, EcoSet BLE IR Remote Controller, Remote Controller, Controller, 20220620 |
