PETKIT P9904 Camera Self Cleaning Cat Litter Box

Please read the user manual carefully before use and keep it properly.

PACKAGE LIST

Before installation and use, please check if all the accessories are complete according to the following list:

PRODUCT DESCRIPTION

Note: The actual product may differ from the image shown due to continuous product improvements; the actual product shall prevail.

Introduction to Component Functions

• High-Performance Cat Litter Pad MAX P9220 is hereinafter referred to as litter pad.
• Pet Odor Eliminator N50 2.0 is hereinafter referred to as N50.
• Breezy Smart Odor Eliminator is hereinafter referred to as smart odor eliminator.

PRODUCT INSTALLATION

Install Trash Bag

1. Press the latch to the right to open the door.
2. Press the back latch to pull out the waste bin.
3. Remove the lid and place the trash bag in the waste bin, ensuring that the trash bag lies flat at the bottom.
   • Note: Fold the trash bag along the dashed line, ensuring that the dashed line is on the edge of the waste bin.
4. Pull the drawstring through the Y-shaped slot to secure it.
5. Install the lid.
   • Note: The buckles should not press against the drawstring, and check if the dashed line is on the edge of the waste bin.

Install N50 and N60

1. Put the N50 in and press firmly to secure it.
2. Install the waste bin back.
3. Close the door.
4. Remove the magnetic side cover.
5. Put the N60 in the smart odor eliminator.
6. Install the magnetic side cover back.
7. Insert the power adapter into the device and connect it to the power source.

PRODUCT USAGE

Device Binding

Note: Please bind the device to the App before using it for the first time. The device can be used only after successful binding.

1. Download the PETKIT App from the App Store or Google Play. Or scan the QR code to download and install.
2. Open the App, click “+” to add the corresponding device, and bind the device according to the guide.
3. When the screen displays the following icon, the binding is successful.

Pour in Cat Litter

Note: The size of cat litter should not exceed 12 mm(0.47 in) in length and 3 mm(0.12 in) in diameter.

1. Press to switch to “Maintenance Mode”, then press OK to execute this function, and the cylinder begins to rotate.
2. When the opening of the cylinder faces up, pour in the cat litter, then press OK to exit “Maintenance Mode”.
3. Double press OK and the device will automatically level cat litter.

Caution: The amount of cat litter should not exceed the MAX line.

Empty The Waste Bin

1. Open the door and pull the drawstring to pack the trash bag.
2. Then pull out the waste bin and take out the packed trash bag.
3. Install a new trash bag.
   • Note: Please use the specialized trash bag.

Description of Control Panel

1. Press on the control panel to switch functions, and press OK to execute the selected function.

Description of Displayed Functions

Description of displayed status

Description of other prompts

There will be scrolling text at the bottom of the screen to describe the current status.

CLEANING AND MAINTENANCE

For the cat’s health, it is recommended to regularly clean or replace these parts.

Caution: Please disconnect the power or turn off the device.

Empty Cat Litter Before Cleaning

Note: To avoid overflowing, please replace a new trash bag first.

1. Align the magnetic cat litter remover with the litter sifter. Once there is a “Click” sound, the installation is successful.
2. Click “Empty” in the App, and empty the remaining cat litter in the cylinder according to the guide.
3. After use, pinch the raised part on the left to remove the cat litter remover.

Detach Cylinder, Litter Sifter, and Litter Pad

Note: Before disassembly, please disconnect the power or turn off the device.

1. Remove the magnetic side cover.
2. Unlock the buckle.
3. Remove the cylinder.
4. Place the cylinder against the wall.
5. Grasp one side of the litter sifter.
6. Press the litter sifter until it is bent and separates from two buckles (points A and B as shown), and take out the litter sifter.
7. Pinch the handle of the litter pad to pull out the litter pad.

Clean Main Unit and Parts

Caution: Do not rinse or soak the main unit; otherwise, the device will be damaged. Only wipe it.

1. Clean every corner of the cylinder with a brush and rinse it.
2. Clean the litter sifter with a brush and rinse it. Wipe the litter pad with a wet towel.
   • Note: Do not vigorously scrub the litter pad to avoid damaging the surface coating.
   • Do not clean with alcohol, disinfectant, bleach, non-neutral detergent, etc.
3. Wipe the main unit with a wet tissue. Wipe the fisheye camera, smart odor eliminator, and proximity sensor with a soft cloth.

Install All Parts

Caution: Install all parts only when they are completely dry.

1. Hold the litter pad, insert the top of it into the groove (arrows need to be aligned), then insert the bottom of it into the groove (arrows need to be aligned).
2. Press gently and release the litter pad; its two sides will be automatically inserted into the groove.
   • Note: Please ensure that the green edge of the litter pad is fully stuck into the groove, and that the arrows on both ends align with the indicated direction.
3. Place the litter sifter in the cylinder, and insert it into point A.
4. Grasp the litter sifter and press it until it is bent.
5. Insert it into point B.
6. Please check: If the litter sifter can be shaken back and forth, the installation is successful.
7. Put the cylinder on the base and lock the buckle, ensuring it is fastened.
8. Install the magnetic side cover.

More Information

VIDEO GUIDE

Video of Installation and Use

Video of Cleaning and Maintenance

BASIC SPECIFICATIONS

A MESSAGE TO OUR VALUED CUSTOMERS

• Thank you for choosing the PETKIT PUROBOT MAX PRO WITH CAMERA SELF-CLEANING CAT LITTER BOX.
• Please read the user manual carefully before installing and using the product. Any installation or usage indicates that you have read and accepted the safety guide below.
• PETKIT is not responsible for or legally liable for any accidents or injuries resulting from the improper use of the product.
• PETKIT reserves the right to interpretation and revision.

SAFETY INSTRUCTIONS

Failure to follow the safety guides below may result in product malfunction or other unforeseen losses.

• Please install and use the device according to the user manual.
• Kittens younger than 6 months old are prohibited from using this device. Cats weighing less than 1.5 kg are prohibited from using this device.
• Do not detach or drag the camera.
• Do not scratch the lens with sharp objects.
• Do not place the device in a high-temperature or high-humidity environment.
• Please use the device indoors. Avoid direct sunlight exposure and keep fire away.
• Although the device is powered by a low voltage, electric leakage may occur if the pet bites the power cable. Please keep your pets from biting the power cable.
• Please use only the original power adapter to avoid device damage or safety hazards.
• Place the device on a firm, level surface, and avoid touching the wall.
• Do not tilt the device to avoid safety hazards.
• Do not rinse or soak the bottom of the device.
• There are weight sensors at the bottom of the device. Please handle it with care.
• Please unplug it if the device is not used for an extended period.
• Children should use this device under the supervision and guidance of adults.
• Repairs should only be performed with professionals’ guidance to avoid accidental damage.
• Do not place anything on the top of the device or press the top of it to avoid affecting the normal operation of the device.
• Before leaving for an extended period, please ensure that there is sufficient cat litter in the litter box and enough space in the waste bin.
• If you have any problems with the product, please contact our customer service for assistance.

Disposal

The European directive 2012 / 19 / CE on Waste Electrical and Electronic Equipment(WEEE), requires that old household electrical appliances must not be disposed in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed-out “wheeled bin” symbol on the product reminds you of your obligation,that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliances.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC STATEMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this equipment must be installed and used in a separation distance of at least 20 cm from all persons.

IC warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Contact

• PETKIT Network Technology(Shanghai) Co.,Ltd.
• www.petkit.com
• support@petkit.com

Documents / Resources

PETKIT P9904 Camera Self Cleaning Cat Litter Box [pdf] User Manual 2A72N-P9904, 2A72NP9904, P9904 Camera Self Cleaning Cat Litter Box, P9904, Camera Self Cleaning Cat Litter Box, Self Cleaning Cat Litter Box, Cat Litter Box, Litter Box, Box

References

• User Manual