Multifunctional
Folding Light
FT10
Function introduction
Folding display
- Handle
- Multi LED
- Adjustable lamp shade
- Torch
Power indicator Light:
100% full charge Green
30% Red
Key switch indication:
Bluetooth mode:
Long press: power on, the green light is on, and then the traffic light flashes to enter the connection mode.
The connection is successful when the green light is blinking.
Long press: Power off, indicator light off.
Light operation:
Short press to turn on the flashlight 75% brightness, and short press again to be 100% brightness. Press and hold to enter the SOS mode.
Short press to enter the warm light mode, short press again to enter the white light mode, short press again to enter the mixed light mode, and long press to adjust the brightness in any mode.
Product specification
| Product material | ABS+PC |
| Battery capacity | 3.7V 6000mAh |
| Operation Frequency: | 2402~2480 MHz |
| RF power: | < 1 mW |
| Power input | Type-C 5V/2A |
| Power output | USB-A 5V/2.4A |
| Light power | 5W |
| Bluetooth version | V5.3 |
| Speaker power | 40 5W |
| Product size | 75*155.6mm |
Hereby, Velleman Group NV declares that the radio equipment type FT10 is in compliance with Direcrtive 2014/53/EU. The full text of the EU declaration of confmnity is available at the followlng Internet address: www.velleman.eu
Documents / Resources
 |
PEREL FT10 Multifunctional Folding Light [pdf] Instruction Manual FT10 Multifunctional Folding Light, FT10, Multifunctional Folding Light, Folding Light, Light |