ACC-CSH2
ACC-CSH2 UPS Mounting Brackets
WARNING
Before installing make sure the supporting surface will support the combined load of the equipment and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail.
Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift and position equipment. This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. Be careful not to pinch fingers when operating the mount. For support please call customer care at 1-800-865-2112.
Symbols
WARNING
Screws must get at least three full turns and fit snug.
Tools Needed for Assembly.
To properly tighten screws: Tighten until screw head makes contact, then tighten another 1/2 turn. Do not overtighten screws.
Parts (Before beginning, make sure you have all parts shown below).
Parts List
| Description | Qty | Part # |
| A battery mount bracket | 2 | 10010588-FWHT |
| B M5 x 8mm socket pin screw | 4 | 520-2038 |
| C M5 locknut | 4 | 530-2042 |
| D 4mm security alien wrench | 1 | 560-9646 |
Warranty
www.peerless-av.com/warranty
Peerless-AV
2300 White Oak Circle
Aurora, IL 60502
Email: tech@peerlessmounts.com
Ph: 800-865-2112
Fax: 800-359-6500
www.peerless-av.com
Peerless-AV Europe
Unit 3 Watford Interchange,
Colonial Way, Watford, Herts,
WD24 4WP, United Kingdom
Customer Care
44 (0) 1923 200 100
www.peerless-av.com
Peerless-AV América Latina
Av. de las Industrias 413
Parque Industrial Escobedo
General Escobedo N.L., México 66062
Servicio al Cliente
01-800-849-65-77
www.peerless-av.com
© 2022, Peerless Industries, Inc.
Documents / Resources
 |
peerless-AV ACC-CSH2 UPS Mounting Brackets [pdf] User Manual ACC-CSH2 UPS Mounting Brackets, ACC-CSH2, UPS Mounting Brackets, Mounting Brackets, Brackets |
