PDP 500-202 Rematch Wireless Controller For Nintendo Switch User Guide
NOTICE: Before using the controller, we recommend fully charging it as it will only have an hour or two of battery life out of the box.
Pairing the Controller
A. Turn on your Nintendo Switch™ device and press any button on the controller.
B. If your controller does not automatically connect, it will need to be paired with the device.
C. Using the Joy-Con™ controllers, navigate to Controllers > Change Grip/Order.
D. Now, using your controller, press and hold the sync button (at the top of the controller by the charging port) for 3 seconds until it pairs and the player indicator light at the bottom is solid.
Re-connecting the Controller
A. If the controller is not connecting with the device, but has already been paired, simply go into Controllers > Change Grip/Order.
B. When prompted, press L and R on your controller to connect.
Tip: You can also press and hold the “Home” button to wake up the controller and Nintendo Switch™ device.
Charging the Controller
A. To program, hold the “function” button and press the back button you’d like to map a control to.
B. Once the “function” button LED is flashing, press any button on the controller to map that button’s function to the back. The LED will blink quickly 3 times, indicating successful programming.
C. To clear a mapped function or disable the back buttons completely, hold down the “function” button and double press any back button.
For:
Nintendo Switch
Nintendo Switch – OLED Model
Nintendo Switch is a trademark of Nintendo. © 2023 Nintendo
Documents / Resources
 |
PDP 500-202 Rematch Wireless Controller For Nintendo Switch [pdf] User Guide 500-202, 500-202 Rematch Wireless Controller For Nintendo Switch, Rematch Wireless Controller For Nintendo Switch, Wireless Controller For Nintendo Switch, Controller For Nintendo Switch, Nintendo Switch, Switch |
