JC-20 Nintendo Switch Controller
Instructions

Charging & Pairing your JC-20

1. Fully charge your JC-20s via the dual USB-C cable provided
   
2. Navigate to controllers menu on Switch dashboard
   
3. Select `Grip/Order’
   
4. Press and hold the pair button on the JC20 rail for 5 seconds, until the LED’s cycle
   
5. To re-connect in future use, press any button once to turn the JC-20 on. It will automatically re-pair to your Switch.
   
6. To turn the JC-20 off, press the pair button once
   
7. After 15 seconds the JC20 will make a Bluetooth connection.

Documents / Resources

giotECK JC-20 Nintendo Switch Controller [pdf] Instructions JC-20, Nintendo Switch Controller, JC-20 Nintendo Switch Controller

References

• User Manual