Paulmann 942.68 Plug and Shine LED Light object Smart Home Zigbee Cube
Product Information
- Model: IP65
- Product Numbers: 942.68, 942.69
- Manufacturing Date: 31.08.2021
- Energy Efficiency Rating: A++
- Compliance with Regulations: 874/2012
- Last Updated: 01.09.2021
- Website: www.paulmann.com/symbols
- Included Components: 1x A, 1x B, 1x C, 1x D, 1x E
- Maximum Length: 50m
- Maximum Wattage: 150W
- Communication Protocol: ZigBee
- Driver Model: Paulmann Art.-Nr. 988.48 (not included)
- Ingress Protection Rating: IP44, IP65
Product Usage Instructions
- Before starting, ensure the product is installed in a suitable location and connected to a compatible power supply.
- If a factory reset is required, perform the following steps:
- Turn the product off and wait for at least 5 seconds.
- Turn the product on and off consecutively for more than 3 seconds, repeating this process for a total of 5 times.
- The factory reset procedure is now complete.
- To turn the product on, simply press the power button.
- For additional information on product symbols and their meanings, refer to the provided website www.paulmann.com/symbols.
This product contains a light source with energy efficiency class <see above>.
Pacakge Content
Connections
Replaceability
- Light source or (4) operating device can be replaced by end users without permanent damage to the luminaire.
- Light source or (5) operating device can be replaced by a qualified electrician without permanently damaging the luminaire.
- Light source or (6) operating device is not replaceable, the luminaire must be replaced.
Documents / Resources
 |
Paulmann 942.68 Plug and Shine LED Light object Smart Home Zigbee Cube [pdf] Instructions 942.68 Plug and Shine LED Light object Smart Home Zigbee Cube, 942.68, Plug and Shine LED Light object Smart Home Zigbee Cube, object Smart Home Zigbee Cube, Smart Home Zigbee Cube |
