Paulmann-logo

Paulmann 79561 LED Illuminated Mirror

Paulmann-79561-LED-Illuminated-Mirror-product

Specifications

  • Model: 795.61 (+MA 326) PHD 05/24
  • IP Rating: IP44
  • Dimensions: 316mm x 5mm
  • Power Supply: 230v ~

Replaceability

  1. The light source or (4) operating device can be replaced by end users without permanent damage to the luminaire.
  2. The light source or (5) operating device can be replaced by a qualified electrician without permanently damaging the luminaire.
  3. The light source or (6) operating device is not replaceable; the luminaire must be replaced.

www.paulmann.com/symbols
Paulmann-79561-LED-Illuminated-Mirror-fig- (8)

This product contains a light source with an energy efficiency class.

Paulmann-79561-LED-Illuminated-Mirror-fig- (1)Safety Instructions

Paulmann-79561-LED-Illuminated-Mirror-fig- (2)Paulmann-79561-LED-Illuminated-Mirror-fig- (2)

www.paulmann.com/symbols

Paulmann Licht Gmbh
Quezinger Feld 2
31832 Springe
Germany

Paulmann-79561-LED-Illuminated-Mirror-fig- (4)www.paulmann.com/symbols

What is in the Box

Paulmann-79561-LED-Illuminated-Mirror-fig- (5)

Installation

  1. Ensure the power supply is switched off before installation.Paulmann-79561-LED-Illuminated-Mirror-fig- (6)Paulmann-79561-LED-Illuminated-Mirror-fig- (7)
  2. Mount the product securely using appropriate hardware.
  3. Connect the power supply following the manufacturer’s instructions.

Operation

  1. Once installed, switch on the power supply.
  2. Use the product according to its intended purpose.
  3. Ensure proper ventilation around the product for optimal performance.

Maintenance

  1. Regularly clean the product with a soft, dry cloth to prevent dust buildup.
  2. Check for any loose connections or signs of wear and tear periodically.
  3. Refer to the user manual for any specific maintenance requirements.

FAQs

Q: What is the IP44 rating of the product?
A: The IP44 rating indicates that the product is protected against solid objects larger than 1mm and water splashes from any direction.

Q: What is the voltage requirement for this product?
A: The product operates on a power supply of 230v ~.

Documents / Resources

Paulmann 79561 LED Illuminated Mirror [pdf] Instructions
79561, 7842171, 795.61 MA 326, 79561 LED Illuminated Mirror, 79561, LED Illuminated Mirror, Illuminated Mirror, Mirror

References

Leave a comment

Your email address will not be published. Required fields are marked *