panlux IR E C Sound Sensor Light
Specifications
- Sound Level: 30~90dB
- Transmission Frequency: 433.92 MHz
- IR (Infrared) Sensor
- Sound Sensor: Ton-Sensor
- Number of Melodies
- Transmission Frequency:
- No Infrared Radiation:
- No Ultraviolet Radiation
- Ballast / Electronic Ballast: VVG EVG
- Sensor Reach (Sensitivity): 2~12m
- Intensity of Illumination: LUX 5lx ~ 1000lx
- Time of Operation: 6-7h/St, 4-5h
- Battery: 3.7V | 600mA, Battery Life: max. 300W max. 1200W
- Time of Charging
- Battery Type
- Max. Input Power of Source
- Means of Connection
- Power Supply Cable Length: 5m, Cable Type: H05RN-F, Cable
Thickness: 3×1.0mm2, 3×1.5mm2 - Operating Temperature Range
- Weight: 0.200kg, Touch/Motion Sensor Weight
- Mounting Options:
- Not Dimmable:
- Color Temperature Options: 3000K WW, 4000K NW, 6000K CW
- Luminous Flux: 3200 lm
Product Usage Instructions
Installation:
Follow the provided mounting options for installation. Ensure the product is placed in an appropriate outdoor location.
Power Connection:
Connect the power supply cable to a suitable power source using the specified means of connection.
Sensor Setup:
Adjust the sensitivity and reach of the sensor according to your needs.
Operation:
Turn on the product and select desired settings such as sound level and melody using the available controls.
Battery Charging:
To charge the battery, connect the product to a power source for the specified charging time.
Maintenance:
Regularly clean the product and ensure proper functioning of all sensors and components.
Thank you for choosing this product from PANLUX s.r.o. Before using or installing the products, please read the instructions and follow the safety rules. Installation should be carried out by a qualified professional or company. Before using, check the product and ensure that it is not damaged in any way; if it is, do not use it. Before any installation ensure that the main electrical supply is disconnected. If the product is damaged, do not attempt to repair or disassemble it.
 Sound sensor |
Number of melodies |
Transmitting frequency |
|
No infrared radiation |
No ultraviolet radiation |
Ballast /Electronic ballast |
Reach of sensor |
Intensity of illumination |
Time setting of sensor |
Time of charging |
Battery life |
Battery type |
Max. input power of source
Means of connection
Lenght of the power supply cable
Type of connection
Operating temperature
Weight
Touch/motion sensor
Mounting options
Not suitable for use in interiors
Dimmable
Colour temperature
Luminous flux
Starting time
Switching cycles
Power factor
Colour rendering index
Standby power
Beam angle (radiation)
Lamp type
Lamholder
Product input power
Input – output
Power supply
Power supply
Max. load
EU declaration of conformity
Power supply option via USB
Contains a light source
Solar power supply
Terminal block
Plug
Connector
Type and number of batteries
Pairable
Pairable (exclusively with PIEZO)
Bluetooth
Wireless phone charging
Presence zone
Disc (led tape)
Cutting length (led tape)
Compatible with WIFI 666
Management system
touchless switch with movement
Door switch
mounting cutout
Radar sensor
PIR sensor
Twilight sensor
Socket on the lamp
Switch
Connector
Mounting box
Warning of the risk of electric shock
Protection class I. designation
Protection class II. designation
Protection class III. designation
The product may only be installed and used indoors
The product is not suitable for covering with thermal insulation material
Observe the minimum distance between the lumi-naire and the illuminated object indicated in the icon
Do not look directly into the light source when it is on
Do not touch the hot cover of the luminaire. After switching off and before further handling the product, allow the luminaire to cool down
The product must not come into contact with water
Do not throw the product into ordinary trash/dustbins. Products marked in this way must be handed over to the collection of used electrical goods
Do not pollute the environment and throw waste into the appropriate containers (baskets, dustbins, containers)
The paper packaging is intended for recycling
Plastic recycling symbol for polyvinyl chloride. PVC does not belong in the yellow container, but in mixed waste
In case of a broken lamp cover, replace the broken cover with a new one. Do not use the lamp with a broken cover
IP PROTECTION
Protection from solid objects ≥ 12,5mm in diameter; no protection from water
Protection from solid objects ≥ 2,5mm in diameter; protection from spraying water
Protection from solid objects ≥ 1mm in diameter; no protection from water
Protection from solid objects ≥ 1mm in diameter; protection from dripping water when unit is tilted up to 15°
Protection from solid objects ≥ 1mm in diameter; protection from splashing water
Dust protected; protection from splashing water
Dust tight; protection from water projected from water jets-
Dust tight; protection against temporary immersion (15cm up to 1m depth) 
Dust tight; protection against complete and continuous submersion in water
MECHANICAL DURABILITY
0,15J – 200g object dropped from 7,5cm in height
0,2J – 200g object dropped from 10cm in height
0,35J – 200g object dropped from 17,5cm in height
0,5J – 200g object dropped from 25cm in height
0,7J – 200g object dropped from 35cm in height
1J – 500g object dropped from 20cm in height
2J – 500g object dropped from 40cm in height
5J – 1,7kg object dropped from 29,5cm in height
10J – 5kg object dropped from 20cm in height
20J – 5kg object dropped from 40cm in height
FAQs
Q: Can this product be used indoors?
A: No, this product is not suitable for indoor use.
Q: Is the product dimmable?
A: The product is not dimmable.
Q: What is the weight of the touch/motion sensor?
A: The weight of the touch/motion sensor is specified in the product specifications.
Documents / Resources
 |
panlux IR E C Sound Sensor Light [pdf] Instruction Manual IR E C Sound Sensor Light, IR E C, Sound Sensor Light, Sensor Light, Light |