PANDUIT logo

FLEXFUSION FRONT/REAR & END OF ROW FLOOR SEAL KIT
Part Number(s) : XG-FSK6, XG-FSK7, XG-FSK8, XG-FSEOR1, XG-FSEOR2
© Panduit Corp. 2021

INSTALLATION INSTRUCTIONS

V00029UA

PANDUIT V00029UA Flex Fusion Front Rear and End of Row Floor Seal Kit

XG-FSEOR* Components Included

PANDUIT V00029UA Flex Fusion Front Rear and End of Row Floor Seal Kit - fig1

XG-FSK* Components Included

PANDUIT V00029UA Flex Fusion Front Rear and End of Row Floor Seal Kit - fig2

For Technical Support: www.panduit.com/resources/install_maintain.asp

Front and Rear Floor Seal Installation

  • Install Floor Seal to front or rear of cabinet frame using (2) M10x20mm Bolts. (Flange on floor seal will face outward away from the cabinet.)
  • NOTE: The height range of the floor skirt is between 31mm (1.2”) and 43.7mm (1.2”) from the floor.

PANDUIT V00029UA Flex Fusion Front Rear and End of Row Floor Seal Kit - fig3

End Of Row Floor Seal Installation

  • Install End of Row Floor Seal to the side of cabinet frame using (2) M5x12mm Screws. (Flange on Side Floor Seal bracket will face inward toward the cabinet.)
  • NOTE: The height range of the floor skirt is between 31mm (1.2”) and 43.7mm (1.2”) from the floor.

PANDUIT V00029UA Flex Fusion Front Rear and End of Row Floor Seal Kit - fig4

PANDUIT logo

www.panduit.com
For Instructions in Local Languages
and Technical Support: www.panduit.com/resources/install_maintain.asp
E-mail: [email protected]
Phone: 866-405-6654

Documents / Resources

PANDUIT V00029UA Flex Fusion Front Rear and End of Row Floor Seal Kit [pdf] Instruction Manual
V00029UA, Flex Fusion Front Rear and End of Row Floor Seal Kit, V00029UA Flex Fusion Front Rear and End of Row Floor Seal Kit, Fusion Front Rear and End of Row Floor Seal Kit, Rear and End of Row Floor Seal Kit, End of Row Floor Seal Kit, Row Floor Seal Kit, Floor Seal Kit, Seal Kit

Leave a comment

Your email address will not be published.