PANDUIT LCMA35 Compression Connector
Product Specifications
- Manufacturer: Panduit Corp.
- Model: T-PMPI-308-PC
- Compatible Connectors: CD-2001-XXX, CD-920-XXX
- Tool Compatibility: CT-100 (Manual), CT-200, CT-1570 (Manual), CT-600 (Air), CT-1701 (Manual)
Product Usage Instructions
Installation Process
- Using the appropriate installation tool, insert the connector into the die.
- Crimp the connector between the color bands or knurl markings.
- Use the markings as a guide to evenly space crimps on the barrel of the connector.
- Begin crimping near the tongue end of the lug and continue crimping toward the wire end.
Tool Chart and Crimping Guidelines
The tool chart provides information on the required number of compressions based on the tool and die combination used. Refer to pages 2 & 3 for detailed crimping guidelines.
Frequently Asked Questions
- Q: What wire sizes are compatible with the LCMA, LCMD, LCMDN, and SCMS connectors?
- A: The connectors support various wire sizes ranging from Class 2 to Class 6. Refer to the tool chart for specific wire size compatibility.
- Q: How should I determine the correct die pocket number for crimping?
- A: The die pocket number, indicated in the tool chart, corresponds to the wire size and class. Match the wire size to the appropriate die pocket number for accurate crimping.
- Q: Where can I find technical support for installation assistance?
- A: For technical support, contact techsupport@panduit.com or visit www.panduit.com. You can also reach customer service at cs@panduit.com or call 800-777-3300.
Instruction
Installation
Using installation tooling shown on other side, insert the connector in die and crimp between color bands or knurl markings, use these markings as a guide to evenly space crimps on barrel of connector. Begin crimping near the tongue end of the lug and continue crimping toward the wire end. IMAGES ABOVE DEPICT CRIMP ZONES, AND SERVE AS A GENERAL GUIDELINES FOR THE CRIMP AREA. REQUIRED NUMBER OF COMPRESSIONS SHOWN ON TOOL CHART IN ( ) ON PAGES 2 & 3 BASED ON TOOL AND DIE COMBINATION USED.
Tool Chart
Tool Chart for Compression Connectors Types LCMA, LCMD, LCMDN, and SCMS with Metric Class 2, 5, & 6 Copper Cable
Panduit Tool Part Number (For Class 2 Wire) | ||||||||
CT-100 (Manual) |
CT-200 CT-1570
(Manual) |
CT-600 (Air) |
CT-1701 (Manual) |
A
See Tool List Below |
B
See Tool List Below |
|||
Cembre Tool Part Number*** | ||||||||
HT131-C HT-131LN-C RHC 131LN
B 131-C B 131-C-KV B 131LN-C B 131-UC (14.6 Ton Hyd.) |
||||||||
Panduit Part No. |
Wire Size &
Class 2r |
Wire Strip Length (mm) |
Die Pocket Number (Crimp Qty.) |
Die Part Number Color & Die Index Number (Crimp Qty.) |
||||
LCMA2.5 |
1.5-2.5 Class 2r |
– |
22-10 (1) |
22-14 (1) 16-14 (1) |
CT-570 16-14 (1) |
P10 (1) |
– |
– |
LCMA6 LCMD6 |
4 – 6mm² Class 2r |
– – |
22-10 (2) |
12-10 (2) |
CT-570 12-10
(2) |
P10 (2) |
– |
– |
LCMA10 LCMD10 SCMS10 |
10mm² Class 2r |
–
– 16.5 |
– |
– |
– |
– |
CD-2001-8-SET
Red P21 (1) |
CD-920-8
Red P21 (1) |
LCMA16 LCMD16 SCMS16 |
16mm² Class 2r |
–
– 19.0 |
– |
– |
– |
– |
CD-2001-8-SET
Red P21 (1) |
CD-920-8
Red P21 (1) |
LCMA25 LCMD25 |
25mm² Class 2r |
–
– |
– |
– |
– |
– |
CD-2001-4-SET Gray P29 (1) |
CD-920-4 Gray P29 (1) |
SCMS25 | 19.5 | |||||||
LCMA35 LCMD35 SCMS35 |
35mm² Class 2r |
–
– 19.5 |
– |
– |
– |
– |
CD-2001-4-SET
Gray P29 (1) |
CD-920-4
Gray P29 (1) |
LCMA50 LCMD50 SCMS50 |
50mm² Class 2r |
–
– 26.0 |
– |
– |
– |
– |
CD-2001-1-SET
Green P37 (1) |
CD-920-1
Green P37 (1) |
LCMA70 LCMD70 SCMS70 |
70mm² Class 2r |
–
– 27.5 |
– |
– |
– |
– |
CD-2001-2/0-SET
Black P45 (2) |
CD-920-2/0
Black P45 (2) |
LCMA95 LCMD95 SCMS95 |
95mm² Class 2r |
–
– 28.5 |
– |
– |
– |
– |
CD-2001-4/0-SET
Purple P54 (2) |
CD-920-4/0
Purple P54 (2) |
LCMA120 LCMD120 LCMDN120 |
120mm² Class 2r |
– – |
– |
– |
– |
– |
CD-2001-250-SET Yellow P62 (2) |
CD-920-250 Yellow P62 (2) |
SCMS120 | 30.0 | |||||||
LCMA150 LCMD150 LCMDN150 SCMS150 |
150mm² Class 2r |
– – 30.0 |
– |
– |
– |
– |
CD-2001-300-SET White P66 (2) |
CD-920-300 White P66 (2) |
LCMA185 LCMD185 SCMS185 |
185mm² Class 2r |
–
– 32.0 |
– |
– |
– |
– |
CD-2001-400-SET
Blue P76 (2) |
CD-920-400
Blue P76 (2) |
LCMA240 LCMD240 SCMS240 |
240mm² Class 2r |
–
– 37.5 |
– |
– |
– |
– |
CD-2001-500-SET
Brown P87 (2) |
CD-920-500
Brown P87 (2) |
LCMA300 LCMD300 SCMS300 |
300mm² Class 2r |
–
– 39.0 |
– |
– |
– |
– |
– |
CD-920-600
Green P94 (2) |
LCMAX300 LCMDX300 SCMSX300 |
375mm² Class 2r |
–
– 49.0 |
– |
– |
– |
– |
– |
– |
LCMA400 LCMD400 SCMS400 |
400mm² Class 2r |
– – 49.0 |
– |
– |
– |
– |
– |
CD-920-750 CD-940-750**
Black P106 (2) |
LCMA500 LCMD500 SCMS500 |
500mm² Class 2r |
–
– 49.5 |
– |
– |
– |
– |
– |
CD-940-1000**
White P125 (3) |
LCMA630 LCMD630 SCMS630 |
630mm² Class 2r |
–
– 67.0 |
– |
– |
– |
– |
– |
CD-940-1000**
White P125 (4) |
LCMA630 LCMD630 |
1000 kcmil Class G |
– – |
– |
– |
– |
– |
– |
CD-940-750A** Red P125
(1) CD-940-1000** White P125 (2) |
Panduit Tool Part Number | |||||||||||
(For Class 5 & 6 Wire) | |||||||||||
CT-100 (Manual) |
CT-200 CT-1570
(Manual) |
CT-600 (Air) |
CT-1701 (Manual) |
A
See Tool List Below |
B
See Tool List Below |
B See Tool List Below |
|||||
Cembre Tool | |||||||||||
Part Number*** | |||||||||||
HT131-C | HT131-C | ||||||||||
HT-131LN-C | HT-131LN-C | ||||||||||
RHC 131LN | RHC 131LN | ||||||||||
B 131-C | B 131-C | ||||||||||
B 131-C-KV | B 131-C-KV | ||||||||||
B 131LN-C | B 131LN-C | ||||||||||
B 131-UC | B 131-UC | ||||||||||
(14.6 Ton Hyd.) | (14.6 Ton Hyd.) | ||||||||||
Wire | Bottom | Top | |||||||||
Panduit Part No. | Size
& Class |
Die Pocket Number (Crimp Qty.) | Die Part Number Color & Die Index Number
(Crimp Qty.) |
Nest Die Part Number,
Die Color, |
Indentor Die Part Number,
Die Index |
Indenter
(Crimp Qty.) |
|||||
5f,6f | Index Number | Number | |||||||||
LCMA2.5 |
1.5 – 2.5mm² Class 5f Only |
22-10 (1) |
22-14
(1) 16-14 (1) |
CT-570 16-14 (1) |
P10 (1) |
– |
– |
– |
– |
– |
|
LCMA6 LCMD6 |
4 – 6mm² Class 5f Only |
22-10 (2) |
12-10 (2) |
CT-570 12-10
(2) |
P10 (2) |
– |
– |
– |
– |
– |
|
LCMA10 | |||||||||||
LCMD10 | – | – | – | – | – | – | – | – | – | – | |
SCMS10 | |||||||||||
LCMA16 LCMD16 SCMS16 | 10mm² Class 5f Class 6f |
– |
– |
– |
– |
CD-2001-8-SET
Red P21 (1) |
CD-920-8
Red P21 (1) |
CD-920-4NEST Gray P29 |
CDI-920-10 1 |
(1) |
|
CD-2001-8-SET | CD-920-8 | ||||||||||
LCMA25 LCMD25 |
16mm² Class 5f Class 6f |
– |
– |
– |
– |
Red P21 (1) | Red P21 (1) |
CD-920-4NEST Gray P29 |
CDI-920-10 1 |
(1) |
|
CD-2001-8-SET | CD-920-8 | ||||||||||
Red P21 | Red P21 | ||||||||||
(2) | (2) | ||||||||||
LCMA35 LCMD35 SCMS35 | 25mm² Class 5f Class 6f |
– |
– |
– |
– |
CD-2001-4-SET
Gray P29 (1) |
CD-920-4
Gray P29 (1) |
CD-920-1/0NEST Pink P42 |
CDI-920-24 2 |
(1) |
|
LCMA50 LCMD50 SCMS50 | 35mm² Class 5f Class 6f |
– |
– |
– |
– |
CD-2001-2-SET
Brown P33 (2) |
CD-920-2
Brown P33 (2) |
CD-920-3/0NEST Orange P50 |
CDI-920-24 2 |
(1) |
|
LCMA70 LCMD70 SCMS70 | 50mm² Class 5f Class 6f |
– |
– |
– |
– |
CD-2001-1-SET
Green P37 (2) |
CD-920-1
Green P37 (2) |
CD-920-3/0NEST Orange P50 |
CDI-920-24 2 |
(1) |
|
LCMA95 LCMD95 SCMS95 | 70mm² Class 5f Class 6f |
– |
– |
– |
– |
CD-2001-2/0-SET
Black P45 (2) |
CD-920-2/0
Black P45 (2) |
CD-920-250NEST Yellow P62 |
CDI-920-48 4 |
(1) |
|
LCMA120 | CD-2001-3/0-SET | CD-920-3/0 | |||||||||
LCMD120 | Orange P50 | Orange P50 | |||||||||
LCMDN120 | 95mm² Class 5f
Class 6f |
– |
– |
– |
– |
(2) | (2) | CD-920-400NEST
Blue P76 |
CDI-920-48 4 |
(1) |
|
CD-2001-3/0-SET | CD-920-3/0 | ||||||||||
SCMS120 | Orange P50 | Orange P50 | |||||||||
(3) | (3) | ||||||||||
LCMA150 LCMD150 LCMDN150 SCMS150 |
120mm² Class 5f Class 6f |
– |
– |
– |
– |
– |
– |
CD-920-400NEST Blue P76 |
CDI-920-48 4 |
(1) |
|
LCMA185 LCMD185 SCMS185 | 150mm² Class 5f Class 6f |
– |
– |
– |
– |
– |
– |
CD-920-400NEST Blue P76 |
CDI-920-48 4 |
(1) |
|
LCMA240 LCMD240 SCMS240 | 185mm² Class 5f Class 6f |
– |
– |
– |
– |
– |
– |
CD-920-500NEST Brown P87 |
CDI-920-48 4 |
(1) |
|
LCMA300 LCMD300 SCMS300 | 240mm² Class 5f Class 6f |
– |
– |
– |
– |
– |
– |
CD-920-750NEST Black P106 |
CDI-920-60 6 |
(1) |
|
LCMAX300 LCMDX300 SCMSX300 | 300mm² Class 5f Only |
– |
– |
– |
– |
– |
– |
CD-920-3000MXNST P32 |
CDI-920-60 6 |
(1) |
|
LCMA400 | |||||||||||
LCMD400 | – | – | – | – | – | – | – | – | – | ||
SCMS400 | |||||||||||
LCMA500 | |||||||||||
LCMD500 | – | – | – | – | – | – | – | – | – | ||
SCMS500 | |||||||||||
LCMA630 | |||||||||||
LCMD630 | – | – | – | – | – | – | – | – | – | ||
SCMS630 |
A
- CT-2001, CT-2001/L, CT-2001/LE, CT-2002, CT-2002/L, CT-3001, CT-3001/E,
- CT-3001/ST, CT-3001/STINT, CT-3001/STUK, CT-3001/STAUS, CT-3001/TO,
- CT-3001/CCP, CT-3001/CCPINT, CT-3001/CCPUK, CT-3001/CCPAUS,
- CT-3001/CCPTO, CT-3001/STBT, CT-3001/CCPBT.
B
- CT-920, CT-920/CV, CT-920CH, CT-920CH/CV, CT-920CH/CCP, CT-930,
- CT-930CH, CT-940CH*, CT-2920, CT-2920/CCP, CT-2920/CCPINT,
- CT-2920/CCPUK, CT-2920/CCPAUS, CT-2920/CCPTO, CT-2930, CT-2930/L,
- CT2930/LE, CT-2931, CT-2931/ST, CT-2931/STINT, CT-2931/STUK, CT-2931/STAUS,
- CT-2931/TO, CT-2931/STCV, CT-2931/STCVINT, CT-2931/STCVUK,
- CT-2931/STCVAUS, CT-2931/CVTO, CT-2940*, CT-2940/L*, CT-2940/LE*,
- CT-2940/ST*, CT-2940/STINT*, CT-2940/STUK*, CT-2940/STAUS*, CT-2940/TO*
- CT-2920/CCPBT, CT-2931/STBT, CT-2940/STBT.
* CD-920 dies can be used with CT-940CH and CT-2940 tools with die adapter.
** CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools.
*** Cembre tools used with Panduit CD-920 dies. The maximum splice size with Cembre tools is SCMS185.
± Maximum splice size is SCMS185, Maximum splice size SCMS400 with CT-2920/CCP AND CT-2920CH/CCP
For Instructions in Local Languages and Technical Support:
- techsupport@panduit.com
- E-mail:
- Phone:
Documents / Resources
![]() |
PANDUIT LCMA35 Compression Connector [pdf] Installation Guide LCMA35-10-C, T-PMPI-308-PC, CD-2001-XXX, CD-920-XXX, LCMA35 Compression Connector, LCMA35, Compression Connector, Connector |