ORACLE LIGHTING Jeep Comanche MJ LED Tail Lights
ORACLE LIGHTING
COMANCHE MJ TAIL LIGHTS ORACLE PART #5909
INSTALLATION GUIDE
TOOLS NEEDED
- PHILLIPS HEAD SCREWDRIVER
- FLAT HEAD SCREWDRIVER WIRE CRIMPS
- STRIPPERS
- HEAT SOURCE
- STEP: 1
WATCH THE VIDEO SCAN QR OR VISIT: WWW.YOUTUBE.COM/WATCH?V=F5GKZSYK2Z0
- REMOVE THE (2) PHILLIPS SCREWS ON THE OUTSIDE OF THE LENS.
- NEXT, REMOVE THE (2) PHILLIPS SCREWS ON THE INSIDE OF THE TRUCK BED SIDE.
- NOW TAIL LIGHT CAN BE REMOVED. UNPLUG THE
- START ON THE BOTTOM SOCKET WITH (3) WIRES ONLY. CLIP WIRES FROM SOCKET.
- CONNECT THE BLACK WIRE TO THE BLACK WIRE ON THE QUICK DISCONNECT.
- CONNECT THE BLUE WIRE TO THE WHITE WIRE ON THE QUICK DISCONNECT.
- CONNECT THE BROWN WIRE TO THE YELLOW WIRE ON THE QUICK DISCONNECT.
- SECOND SOCKET, CLIP THE WIRES. TWIST BOTH BROWN WIRES TOGETHER.
- THEN TWIST BOTH BLUE WIRES TOGETHER CONNECT THE BLACK WIRE TO THE BLACK WIRE ON THE QUICK DISCONNECT.
- CONNECT THE TWISTED BLUE WIRES TO THE WHIte WIrE ON THE DISCONNECT
- CONNECT THE TWISTED BROWN WIRES TO THE VEIl OW WIRE ON THE QuICK DISCONNECT
- WIRING FOR REVERSE LIGHT PLUG, BLACK WIRE TO BLACK WIRE, WHITE WIRE TO BROWN WIRE W/WHITE STRIPE.
- HEAT UP THE HEAT SHRINK ON THE END OF THE CONNECTORS. USE A HEAT GUN OR OTHER HEAT SOURCE.
REMOVE ORIGINAL SPEED CLIPS. REPLACE WITH NEW SPEED CLIPS. NOW YOU CAN INSTALL YOUR NEW TAIL LIGHTS.
www.oraclelights.com © 2023 ORACLE LIGHTING 4401 Division ST. Metairie, LA 70002 FOR ADDITIONAL TECHNICAL SUPPORT PLEASE CALL US 1(800)407-5776
Documents / Resources
 |
ORACLE LIGHTING Jeep Comanche MJ LED Tail Lights [pdf] Installation Guide Jeep Comanche MJ LED Tail Lights, Comanche MJ LED Tail Lights, MJ LED Tail Lights, LED Tail Lights, Tail Lights, Lights |
