Contents
hide
OPTONICA 6391 4 Ways DMX Signal Splitter Instructions
Ways DMX Signal Splitter
SKU: 6391
Input and output optical isolation/Four independent outputs/DMX512-A compatible
Features
- One DMX512 signal input, repeat four DMX512 signal output, each allowing for 32 DMX devices to be connected.
- Dedicated to amplify, distribute and insulate the signal that comes from the lighting system equipment when it is connected to the bus of DMX512(or RS-485).
- Photo-electricity insulation between input and output terminals, output terminals among channels.
- Input isolated from outputs to 500VAC, 1000VDC.
- Outputs are isolated from each other to 500VAC, 1000VDC.
- Input and outputs are ture RS-485 rated, and no microprocessors are used for maximum reliability.
- 3 pin XLR / 3 screw terminals input and loop through, 5 pin XLR option available.
- front panel LEDs indicate power in, DMX in and DMX output status at each output
Technical Parameters
| Input and Output | |
| Input voltage | 12-36VDC |
| Input current | 0.5A Max. |
| Input signal | DMX512 |
| Output signal | DMX512 x 4 |
| Safety and EMC | |
|
EMC standard (EMC) |
EN55032:2015, EN61000-3-2:2014, EN61000-3-2:2013, EN55024 :2010/A1:2015 |
| Safety standard(LVD) | EN 61347-1:2015
EN 61347-2-11:2015 |
| Certification | CE,EMC,LVD |
| Warranty and Protection | |
| Warranty | 3 years |
| Protection | Reverse Polarity |
Mechanical Structures and Installations
Dimension
Wiring Diagram
DMX 512 Mater
Note:
- A passive loop-through connection allows onward connection to other DMX512 devices. If this feature is not required then the signal must be terminated.
- Each output is capable of driving 32 additional DMX512 devices. It is not necessary to terminate any outputs that are not connected.
However, a terminator must be connected to the final DMX512 device. - Connect 0.25W 90-120Ω terminal resistor for termination
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;
Read More About This Manual & Download PDF:
Documents / Resources
 |
OPTONICA 6391 4 Ways DMX Signal Splitter [pdf] Instructions 6391 4 Ways DMX Signal Splitter, 6391, 4 Ways DMX Signal Splitter |
