Optimal Audio ZonePad 8 Zone Touchscreen Wall Controller User Manual

Optimal Audio ZonePad 8 Zone Touchscreen Wall Controller

Specifications

Usage Instructions

Overview

The ZonePad 8 is an elegant wall-mounted touchscreen controller designed to provide clear and intuitive access to the controls of up to eight zones within an Optimal Audio commercial audio system. It features a vibrant 8-inch IPS touch display and a tempered glass capacitive touch panel.

Key Features

• Easy selection and volume control of playback sources and microphones.
• Control up to eight zones from one central position.
• Seamless integration with Optimal Audio Zone controllers.
• Powered via Power over Ethernet (POE) from a compatible router or switch.
• Optional remote power and Wi-Fi connection available for installations where cabling is not feasible.

Installation and Power

1. Ensure you have a compatible router or switch that supports Power over Ethernet (POE).
2. Connect the ZonePad 8 to the POE-enabled network port. The device will draw power directly from the network connection.
3. For remote power and Wi-Fi connection (if cabling is not possible): Utilize the optional accessory for remote power and to establish a Wi-Fi connection to the Zone controller. Refer to the accessory’s specific instructions for setup.

Operating the ZonePad 8

Once powered on, the ZonePad 8’s 8-inch IPS touch display will activate. Use the capacitive touch panel to:

• Select Zones: Navigate through the interface to select the desired audio zone(s).
• Control Volume: Adjust the volume for selected zones, playback sources, and microphones.
• Select Playback Sources: Choose from available audio playback sources.
• Manage Microphones: Control microphone settings and levels within the zones.

The intuitive interface is designed for effortless operation of complex audio systems.

FEATURES

• 8-inch tempered glass touch panel
• Durable and impact-resistant
• Simple installation
• Auto-detection of Zone controllers
• Flexible mounting options

ZonePad 8 is an elegant wall-mounted touchscreen controller, providing users with clear and intuitive access to the controls of up to eight zones within an Optimal Audio commercial audio system. With a vibrant 8-inch IPS touch display and tempered glass capacitive touch panel,  ZonePad 8  offers a sophisticated and user-friendly interface, providing users with the ability to operate complex audio systems effortlessly.

ZonePad 8 enables easy selection and volume control of playback sources and microphones across eight zones from one central position, making it ideal for dynamic commercial environments. Its seamless integration with Optimal Audio Zone controllers, powerful quad-core processor, and secure design ensures reliable and responsive control tailored to any venue’s unique needs.
Power is delivered via POE from a compatible router or switch.
For venues where the installer cannot run cables, ZonePad 8 can be powered remotely and connect to a Zone controller via WIFI using the optional accessory.

APPLICATIONS

ZonePad 8

8-zone touchscreen wall controller

Troubleshooting

• Device not powering on:
  • Ensure the POE connection is secure and the router/switch is providing power.
  • If using the optional remote power accessory, verify it is correctly connected and receiving power.
• No connection to Zone controller:
  • Check network cable connections for POE setups.
  • If using Wi-Fi, ensure the optional accessory is correctly configured and within range of the Zone controller’s Wi-Fi network.
  • Verify the Zone controller is powered on and functioning correctly.
• Touchscreen unresponsive:
  • Gently clean the screen surface to remove any dirt or debris.
  • Restart the device by disconnecting and reconnecting power (if safe to do so).
• Interference or undesired operation:
  • Ensure the device is installed and operated with a minimum distance of 25mm between the radiator and your body, as per FCC guidelines.
  • Check for other electronic devices that might be causing electromagnetic interference.

FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 25mm between the radiator and your body.