one LIGHT 89009L DALI and Push to DIM LED Driver Instruction Manual
DALI Dimming wiring diagram
Push to DIM wiring diagram
Specifications
Push to DIM wiring diagram
- ON/OFF: short push.
- Dimming: press and hold.
- Dimming up or down: every time you press and hold, dimming changes direction.
- Built-in memory: light returns to the previous dimming level when is switched OFF and ON again, even after power failure
Synchronization
Up to 64pcs LED drivers can be connected to the same push button. This means there is no need for any additional sync cables in large installations, where many drivers should be controlled by one push button. If more than one driver is connected to the same push button, in order to achieve synchronization, the following action is required: Switch off the light. Press and hold for more than 6 seconds.
Warnings:
- Mahe sure that the product is installed properly before connecting to electricity.
- Do not cover the fitting.
- Maintenance and installation should only be carried out by a professional electrician.
Documents / Resources
 |
one LIGHT 89009L DALI and Push to DIM LED Driver [pdf] Instruction Manual 89009L, 89009L DALI and Push to DIM LED Driver, DALI and Push to DIM LED Driver |
